ToneAdapt

Loading...

NUX Mighty 20 BT MkII settings

St. Stephen settings for NUX Mighty 20 BT MkII

Grateful Dead · adapted 2 times on ToneAdapt

To get the Grateful Dead "St. Stephen" solo tone on a NUX Mighty 20 BT MkII, select the FENDER CLEAN preset, then set Gain 4, Bass 6, Mid 5, Treble 7, Reverb 1.5, Patch level 5. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Solo settings

updated 2026-04-04

Preset / mode
FENDER CLEAN
Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

NUX Mighty 20 BT MkII knobs

Gain
4
Bass
6
Mid
5
Treble
7
Reverb
1.5
Patch level
5

Built-in effects

  • Reverb off

Playing tips

  • Use your amp's built-in reverb to enhance the spacious feel of the solo.
  • Focus on touch-sensitive playing to achieve the articulate and dynamic response characteristic of the original tone.
  • Experiment with your picking attack to maintain clarity in single-note lines.

The original rig

What Grateful Dead used on the recording, for reference. ToneAdapt translates this to the controls your NUX Mighty 20 BT MkII actually has.

Guitar
Gibson SG Standard (late 1960s, likely 1967-1968, stock wiring)
Amp
Fender Twin Reverb (blackface, late 1960s, likely 1967-1968)
Gain
3.5
Bass
6
Mid
6
Treble
7
Presence
6
Reverb
4
Full St. Stephen tone breakdown, effects and sources →

Different guitar or pedals? Get St. Stephen adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Grateful Dead's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the NUX Mighty 20 BT MkII for St. Stephen?

Start from the FENDER CLEAN preset, then set Gain 4, Bass 6, Mid 5, Treble 7, Reverb 1.5, Patch level 5.

Which pickup should I use for St. Stephen?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Grateful Dead use on St. Stephen?

Guitar: Gibson SG Standard (late 1960s, likely 1967-1968, stock wiring). Amp: Fender Twin Reverb (blackface, late 1960s, likely 1967-1968).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the NUX Mighty 20 BT MkII

All 22 songs for the NUX Mighty 20 BT MkII →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.