ToneAdapt

Loading...

Nux Mighty 20 BT settings

For Whom the Bell Tolls settings for Nux Mighty 20 BT

Metallica · adapted 2 times on ToneAdapt

To get the Metallica "For Whom the Bell Tolls" riff tone on a Nux Mighty 20 BT, select the MODERN METAL (Dim Red) preset, then set Gain 5, Gain 7.5, Master 5, Bass 6, Mid 3.5, Treble 7. Use the bridge pickup with your guitar's tone on 8 and volume on 8-9.

Riff settings

Adapted for a Epiphone Les Paul · updated 2026-09-30

Preset / mode
MODERN METAL (Dim Red)
Pickup
Bridge pickup
Guitar knobs
Tone 8 · Volume 8-9

Nux Mighty 20 BT knobs

Gain
5
Gain
7.5
Master
5
Bass
6
Mid
3.5
Treble
7
Reverb
0
Level
5
Type knob
5
Fx param knob
5

Playing tips

  • Focus on aggressive palm muting to achieve the tight rhythm.
  • Use alternate picking for clarity and articulation in the riff.
  • Experiment with picking dynamics to enhance the percussive quality.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Nux Mighty 20 BT actually has.

Guitar
Gibson Explorer (likely 1984 model, stock pickups at time of recording)
Amp
Marshall JMP 2203 (modified, 100W head, used in studio for Ride the Lightning 1984)
Gain
7.5
Bass
6
Mid
4.5
Treble
7
Presence
6
Reverb
0
Full For Whom the Bell Tolls tone breakdown, effects and sources →

Different guitar or pedals? Get For Whom the Bell Tolls adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Nux Mighty 20 BT for For Whom the Bell Tolls?

Start from the MODERN METAL (Dim Red) preset, then set Gain 5, Gain 7.5, Master 5, Bass 6, Mid 3.5, Treble 7.

Which pickup should I use for For Whom the Bell Tolls?

Bridge pickup, with the guitar's tone at 8 and volume at 8-9.

What gear did Metallica use on For Whom the Bell Tolls?

Guitar: Gibson Explorer (likely 1984 model, stock pickups at time of recording). Amp: Marshall JMP 2203 (modified, 100W head, used in studio for Ride the Lightning 1984).

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Nux Mighty 20 BT

All 20 songs for the Nux Mighty 20 BT →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.