ToneAdapt

Loading...

Nux Mighty 20 MKII settings

Weep for Nothing settings for Nux Mighty 20 MKII

Mayhem · adapted 2 times on ToneAdapt

To get the Mayhem "Weep for Nothing" solo tone on a Nux Mighty 20 MKII, select the SLO 100 preset, then set Gain 8, Bass 5, Mid 4, Treble 7, Reverb 0.5, Loop level 5. Use the bridge pickup with your guitar's tone on 8-10 and volume on 10.

Solo settings

Adapted for a Harley Benton EX-84 Modern EMG · updated 2026-07-09

Preset / mode
SLO 100
Pickup
Bridge pickup
Guitar knobs
Tone 8-10 · Volume 10

Nux Mighty 20 MKII knobs

Gain
8
Bass
5
Mid
4
Treble
7
Reverb
0.5
Loop level
5
Patch level
7

Built-in effects

  • Reverb off

Playing tips

  • Use a strong pick attack to enhance the crispness of your notes.
  • Focus on palm muting for certain runs to maintain clarity and tightness.
  • Experiment with your amp's built-in reverb set to a low level for subtle ambiance.

Riff settings

Adapted for a Ibanez GIO GRG120QASP · updated 2026-05-01

Preset / mode
METAL LEAD
Pickup
Bridge pickup
Guitar knobs
Tone 6-8 · Volume 8-10

Nux Mighty 20 MKII knobs

Gain
8.5
Volume
5
Bass
6
Mid
3
Treble
7
Reverb
0
Delay
0
Mod
0
Master volume
6

Playing tips

  • Use aggressive palm muting for tight articulation.
  • Focus on precise picking to enhance clarity in the riff.
  • Experiment with dynamics to emphasize the percussive nature of the riff.

The original rig

What Mayhem used on the recording, for reference. ToneAdapt translates this to the controls your Nux Mighty 20 MKII actually has.

Guitar
Unknown (not specified in sources for this recording)
Amp
Unknown (not specified in sources for this recording)
Gain
8.5
Bass
5.5
Mid
4.5
Treble
7
Presence
6
Reverb
1
Full Weep for Nothing tone breakdown, effects and sources →

Different guitar or pedals? Get Weep for Nothing adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Mayhem's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Nux Mighty 20 MKII for Weep for Nothing?

Start from the SLO 100 preset, then set Gain 8, Bass 5, Mid 4, Treble 7, Reverb 0.5, Loop level 5.

Which pickup should I use for Weep for Nothing?

Bridge pickup, with the guitar's tone at 8-10 and volume at 10.

What gear did Mayhem use on Weep for Nothing?

Guitar: Unknown (not specified in sources for this recording). Amp: Unknown (not specified in sources for this recording).

Will these settings work with my guitar?

These settings were adapted for a Harley Benton EX-84 Modern EMG. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Nux Mighty 20 MKII

All 19 songs for the Nux Mighty 20 MKII →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.