ToneAdapt

Loading...

NUX Mighty Lite BT MKII settings

Another Brick In the Wall, Pt. 2 settings for NUX Mighty Lite BT MKII

Pink Floyd · adapted 2 times on ToneAdapt

To get the Pink Floyd "Another Brick In the Wall, Pt. 2" solo tone on a NUX Mighty Lite BT MKII, select the SILKY SOLO preset, then set Gain 5.5, Volume 7, Reverb 3, Tone 6, Tap tempo 0, Delay reverb 0. Use the neck pickup with your guitar's tone on 7 and volume on 8-9.

Solo settings

Adapted for a Ibanez GRX70QA · updated 2026-07-02

Preset / mode
SILKY SOLO
Pickup
Neck pickup
Guitar knobs
Tone 7 · Volume 8-9

NUX Mighty Lite BT MKII knobs

Gain
5.5
Volume
7
Reverb
3
Tone
6
Tap tempo
0
Delay reverb
0

Built-in effects

  • Reverb off

Playing tips

  • Use your amp's built-in chorus set to a moderate level to create a lush modulation swirl.
  • Set the delay to a moderate level for echoed repeats that enhance the sustain of your notes.
  • Play with a light touch to achieve the touch-sensitive dynamics characteristic of Gilmour's style.

The original rig

What Pink Floyd used on the recording, for reference. ToneAdapt translates this to the controls your NUX Mighty Lite BT MKII actually has.

Guitar
Fender Stratocaster (Black Strat, 1970s, maple neck, stock single coils at time of recording)
Amp
Hiwatt DR103 Custom 100 Head into WEM Super Starfinder 4x12 cabinet
Gain
5.5
Bass
6.5
Mid
7
Treble
7
Presence
6
Reverb
3
Full Another Brick In the Wall, Pt. 2 tone breakdown, effects and sources →

Different guitar or pedals? Get Another Brick In the Wall, Pt. 2 adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pink Floyd's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the NUX Mighty Lite BT MKII for Another Brick In the Wall, Pt. 2?

Start from the SILKY SOLO preset, then set Gain 5.5, Volume 7, Reverb 3, Tone 6, Tap tempo 0, Delay reverb 0.

Which pickup should I use for Another Brick In the Wall, Pt. 2?

Neck pickup, with the guitar's tone at 7 and volume at 8-9.

What gear did Pink Floyd use on Another Brick In the Wall, Pt. 2?

Guitar: Fender Stratocaster (Black Strat, 1970s, maple neck, stock single coils at time of recording). Amp: Hiwatt DR103 Custom 100 Head into WEM Super Starfinder 4x12 cabinet.

Will these settings work with my guitar?

These settings were adapted for a Ibanez GRX70QA. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the NUX Mighty Lite BT MKII

All 26 songs for the NUX Mighty Lite BT MKII →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.