ToneAdapt

Loading...

Peavey Rage 158 settings

Creep settings for Peavey Rage 158

Radiohead · adapted 3 times on ToneAdapt

To get the Radiohead "Creep" riff tone on a Peavey Rage 158, set Bass 5, Mid 6, Treble 6, Drive gain 7, Clean volume 0, Drive select 1. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-10-27

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Peavey Rage 158 knobs

Bass
5
Mid
6
Treble
6
Drive gain
7
Clean volume
0
Drive select
1
Drive volume
5
Modern vintage
0

Built-in effects

  • Reverb off

Playing tips

  • Focus on palm muting for tight, percussive attack.
  • Use aggressive strumming to emphasize the chugging sound.
  • Experiment with picking dynamics to achieve a raw, saturated sound.

The original rig

What Radiohead used on the recording, for reference. ToneAdapt translates this to the controls your Peavey Rage 158 actually has.

Guitar
Fender Telecaster (Jonny Greenwood's main guitar on 'Creep')
Amp
Mesa/Boogie Dual Rectifier Trem-O-Verb Combo Amp
Gain
7
Bass
6
Mid
7
Treble
7
Presence
6
Reverb
2
Full Creep tone breakdown, effects and sources →

Different guitar or pedals? Get Creep adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Radiohead's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Peavey Rage 158 settings for Creep?

Set Bass 5, Mid 6, Treble 6, Drive gain 7, Clean volume 0, Drive select 1.

Which pickup should I use for Creep?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Radiohead use on Creep?

Guitar: Fender Telecaster (Jonny Greenwood's main guitar on 'Creep'). Amp: Mesa/Boogie Dual Rectifier Trem-O-Verb Combo Amp.

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Peavey Rage 158

All 33 songs for the Peavey Rage 158 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.