ToneAdapt

Loading...

Positive Grid Spark 40 settings

Dirty Diana settings for Positive Grid Spark 40

Michael Jackson · adapted 2 times on ToneAdapt

To get the Michael Jackson "Dirty Diana" riff tone on a Positive Grid Spark 40, select the Fender Clean preset, then set Gain 1.5, Bass 4, Mid 5, Treble 5.5, Reverb 0, Delay 5. Use the neck pickup with your guitar's tone on 9-10 and volume on 8-10.

Riff settings

Adapted for a ESP LTD M-10 · updated 2026-09-20

Preset / mode
Fender Clean
Pickup
Neck pickup
Guitar knobs
Tone 9-10 · Volume 8-10

Positive Grid Spark 40 knobs

Gain
1.5
Bass
4
Mid
5
Treble
5.5
Reverb
0
Delay
5
Mod
5

Built-in effects

  • Reverb on (plate) · 3

Playing tips

  • Focus on tight, rhythmic playing to capture the percussive nature of the riff.
  • Maintain a clean attack on the strings for clarity in the notes.
  • Use subtle palm muting on certain notes to enhance the tightness of the riff.

The original rig

What Michael Jackson used on the recording, for reference. ToneAdapt translates this to the controls your Positive Grid Spark 40 actually has.

Guitar
Jackson Soloist (late 1980s, likely custom, HSS or HH configuration)
Amp
Late '60s Marshall Plexi head into 1980s Marshall 4x12 cab with Celestion V30 speakers
Gain
7
Bass
6
Mid
6
Treble
7.5
Presence
6.5
Reverb
2
Full Dirty Diana tone breakdown, effects and sources →

Different guitar or pedals? Get Dirty Diana adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Michael Jackson's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Positive Grid Spark 40 for Dirty Diana?

Start from the Fender Clean preset, then set Gain 1.5, Bass 4, Mid 5, Treble 5.5, Reverb 0, Delay 5.

Which pickup should I use for Dirty Diana?

Neck pickup, with the guitar's tone at 9-10 and volume at 8-10.

What gear did Michael Jackson use on Dirty Diana?

Guitar: Jackson Soloist (late 1980s, likely custom, HSS or HH configuration). Amp: Late '60s Marshall Plexi head into 1980s Marshall 4x12 cab with Celestion V30 speakers.

Will these settings work with my guitar?

These settings were adapted for a ESP LTD M-10. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Positive Grid Spark 40

All 49 songs for the Positive Grid Spark 40 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.