ToneAdapt

Loading...

Positive Grid Spark 40 settings

Pride and Joy settings for Positive Grid Spark 40

Stevie Ray Vaughan · adapted 8 times on ToneAdapt

To get the Stevie Ray Vaughan "Pride and Joy" riff tone on a Positive Grid Spark 40, set Gain 4, Master 5, Bass 6, Mid 7, Treble 6, Reverb 1. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Yamaha Pacifica 112VM · updated 2026-11-13

Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Positive Grid Spark 40 knobs

Gain
4
Master
5
Bass
6
Mid
7
Treble
6
Reverb
1
Mod
0

Built-in effects

  • Reverb on · 1

Playing tips

  • Use your amp's built-in reverb set to 3 for a slight depth that mimics the original's spring reverb.
  • Focus on a percussive attack to capture the Texas shuffle feel.
  • Keep your dynamics in check; play lightly for clean tones and dig in for that edge-of-breakup crunch.

The original rig

What Stevie Ray Vaughan used on the recording, for reference. ToneAdapt translates this to the controls your Positive Grid Spark 40 actually has.

Guitar
1963 Fender Stratocaster 'Number One'
Amp
1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio)
Gain
4
Bass
7
Mid
7
Treble
6
Presence
5.5
Reverb
3
Full Pride and Joy tone breakdown, effects and sources →

Different guitar or pedals? Get Pride and Joy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Positive Grid Spark 40 settings for Pride and Joy?

Set Gain 4, Master 5, Bass 6, Mid 7, Treble 6, Reverb 1.

Which pickup should I use for Pride and Joy?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Stevie Ray Vaughan use on Pride and Joy?

Guitar: 1963 Fender Stratocaster 'Number One'. Amp: 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Pacifica 112VM. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Positive Grid Spark 40

All 49 songs for the Positive Grid Spark 40 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.