ToneAdapt

Loading...

Positive Grid Spark GO settings

Back in Black settings for Positive Grid Spark GO

AC/DC · adapted 3 times on ToneAdapt

To get the AC/DC "Back in Black" riff tone on a Positive Grid Spark GO, select the Spark Original Crunch preset, then set Gain 4, Bass 4, Mid 7, Treble 5, Music volume 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Jackson Dinky · updated 2026-10-24

Preset / mode
Spark Original Crunch
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Positive Grid Spark GO knobs

Gain
4
Bass
4
Mid
7
Treble
5
Music volume
5

Playing tips

  • Focus on a tight picking attack for percussive clarity.
  • Use palm muting on the lower strings for a punchy sound.
  • Keep your dynamics in check to maintain articulation in chords.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Positive Grid Spark GO actually has.

Guitar
Gibson SG Standard (1970s, likely '69-'73, stock humbuckers)
Amp
Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers)
Gain
4
Bass
4
Mid
7.5
Treble
4.5
Presence
5.5
Reverb
0
Full Back in Black tone breakdown, effects and sources →

Different guitar or pedals? Get Back in Black adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Positive Grid Spark GO for Back in Black?

Start from the Spark Original Crunch preset, then set Gain 4, Bass 4, Mid 7, Treble 5, Music volume 5.

Which pickup should I use for Back in Black?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Back in Black?

Guitar: Gibson SG Standard (1970s, likely '69-'73, stock humbuckers). Amp: Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers).

Will these settings work with my guitar?

These settings were adapted for a Jackson Dinky. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Positive Grid Spark GO

All 39 songs for the Positive Grid Spark GO →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.