ToneAdapt

Loading...

Positive Grid Spark Mini settings

Master of Puppets settings for Positive Grid Spark Mini

Metallica · adapted 23 times on ToneAdapt

To get the Metallica "Master of Puppets" riff tone on a Positive Grid Spark Mini, select the JCM 800 preset, then set Gain 9, Reverb 0.5, Power button 1, Preset selector 1, Music channel volume 0, Guitar channel volume 10. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Epiphone Les Paul · updated 2026-11-13

Preset / mode
JCM 800
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Positive Grid Spark Mini knobs

Gain
9
Reverb
0.5
Power button
1
Preset selector
1
Music channel volume
0
Guitar channel volume
10

Built-in effects

  • Reverb on (Spring) · 0.5

Playing tips

  • Focus on tight palm muting for the chugging riffs.
  • Use fast alternate picking to achieve the aggressive attack.
  • Keep the rhythm percussive and precise to enhance articulation.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Positive Grid Spark Mini actually has.

Guitar
ESP MX220 (custom, aka 'Eet Fuk')
Amp
Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet
Gain
9
Bass
6
Mid
3
Treble
7.5
Presence
6.5
Reverb
1
Full Master of Puppets tone breakdown, effects and sources →

Different guitar or pedals? Get Master of Puppets adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Positive Grid Spark Mini for Master of Puppets?

Start from the JCM 800 preset, then set Gain 9, Reverb 0.5, Power button 1, Preset selector 1, Music channel volume 0, Guitar channel volume 10.

Which pickup should I use for Master of Puppets?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Master of Puppets?

Guitar: ESP MX220 (custom, aka 'Eet Fuk'). Amp: Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet.

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Positive Grid Spark Mini

All 31 songs for the Positive Grid Spark Mini →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.