ToneAdapt

Loading...

Positive Grid Spark settings

Comfortably Numb settings for Positive Grid Spark

Pink Floyd · adapted 2 times on ToneAdapt

To get the Pink Floyd "Comfortably Numb" solo tone on a Positive Grid Spark, select the Classic Rock preset, then set Gain 5, Bass 5.5, Mid 6.5, Treble 7, Presence 6, Reverb 3. Use the neck + middle pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Fender Stratocaster · updated 2026-05-30

Preset / mode
Classic Rock
Pickup
Neck + Middle
Guitar knobs
Tone 10 · Volume 10

Positive Grid Spark knobs

Gain
5
Bass
5.5
Mid
6.5
Treble
7
Presence
6
Reverb
3

Built-in effects

  • Reverb on (plate) · 2

Playing tips

  • Use your amp's built-in delay set to a moderate level to recreate the spacious feel of the original tone.
  • Engage the chorus effect for a lush modulation that enhances the liquid lead tone.
  • Focus on smooth, controlled phrasing to achieve the singing sustain characteristic of the original solo.

The original rig

What Pink Floyd used on the recording, for reference. ToneAdapt translates this to the controls your Positive Grid Spark actually has.

Guitar
1969 Fender Stratocaster (alder body, late-'70s Charvel birdseye maple neck)
Amp
Hiwatt DR103 100-watt head (studio, parallel with Yamaha RA-200 rotating speaker cabinet)
Gain
5
Bass
6.5
Mid
7.5
Treble
7
Presence
6
Reverb
2.5
Full Comfortably Numb tone breakdown, effects and sources →

Different guitar or pedals? Get Comfortably Numb adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pink Floyd's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Positive Grid Spark for Comfortably Numb?

Start from the Classic Rock preset, then set Gain 5, Bass 5.5, Mid 6.5, Treble 7, Presence 6, Reverb 3.

Which pickup should I use for Comfortably Numb?

Neck + Middle, with the guitar's tone at 10 and volume at 10.

What gear did Pink Floyd use on Comfortably Numb?

Guitar: 1969 Fender Stratocaster (alder body, late-'70s Charvel birdseye maple neck). Amp: Hiwatt DR103 100-watt head (studio, parallel with Yamaha RA-200 rotating speaker cabinet).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Positive Grid Spark

All 72 songs for the Positive Grid Spark →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.