ToneAdapt

Loading...

Positive Grid Spark settings

Seek & Destroy settings for Positive Grid Spark

Metallica · adapted 3 times on ToneAdapt

To get the Metallica "Seek & Destroy" riff tone on a Positive Grid Spark, set Gain 8.5, Master 7, Bass 6, Mid 2, Treble 8, Reverb 0. Use the bridge pickup with your guitar's tone on 8-10 and volume on 10.

Riff settings

Adapted for a Gibson SG · updated 2026-11-08

Pickup
Bridge pickup
Guitar knobs
Tone 8-10 · Volume 10

Positive Grid Spark knobs

Gain
8.5
Master
7
Bass
6
Mid
2
Treble
8
Reverb
0
Mod
0

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive pick attack for clarity in fast passages.
  • Maintain a steady rhythm to enhance the percussive feel.

Solo settings

Adapted for a Epiphone Les Paul · updated 2026-09-14

Preset / mode
Lead Solo
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Positive Grid Spark knobs

Gain
7.5
Bass
5.5
Mid
4
Treble
8
Presence
6
Reverb
0

Playing tips

  • Focus on aggressive palm muting for tight rhythms.
  • Use fast picking and legato runs to maintain fluidity.
  • Keep the attack sharp to enhance articulation in solos.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Positive Grid Spark actually has.

Guitar
1981 Gibson Flying V
Amp
Marshall JMP 2203 (modified, 100W head)
Gain
8.5
Bass
7
Mid
2.5
Treble
8
Presence
6
Reverb
0
Full Seek & Destroy tone breakdown, effects and sources →

Different guitar or pedals? Get Seek & Destroy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Positive Grid Spark settings for Seek & Destroy?

Set Gain 8.5, Master 7, Bass 6, Mid 2, Treble 8, Reverb 0.

Which pickup should I use for Seek & Destroy?

Bridge pickup, with the guitar's tone at 8-10 and volume at 10.

What gear did Metallica use on Seek & Destroy?

Guitar: 1981 Gibson Flying V. Amp: Marshall JMP 2203 (modified, 100W head).

Will these settings work with my guitar?

These settings were adapted for a Gibson SG. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Positive Grid Spark

All 72 songs for the Positive Grid Spark →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.