ToneAdapt

Loading...

Roland Cube 20X settings

1979 settings for Roland Cube 20X

The Smashing Pumpkins · adapted 2 times on ToneAdapt

To get the The Smashing Pumpkins "1979" riff tone on a Roland Cube 20X, set Gain 4, Bass 5, Mid 6, Treble 6, Reverb 1.5, Efx knob 5. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Epiphone Les Paul · updated 2026-09-30

Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Roland Cube 20X knobs

Gain
4
Bass
5
Mid
6
Treble
6
Reverb
1.5
Efx knob
5
Lead gain
0
Lead volume
0
Clean volume
7
Power squeezer
1
Delay reverb knob
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in chorus set to a moderate level to recreate the shimmering effect of the original tone.
  • Adjust the reverb to add depth to the clean riff, aiming for a subtle ambiance.
  • Keep the clean volume high to maintain clarity and presence in the mix.

The original rig

What The Smashing Pumpkins used on the recording, for reference. ToneAdapt translates this to the controls your Roland Cube 20X actually has.

Guitar
Fender Stratocaster (likely 1970s or early 80s, as used by Billy Corgan in studio)
Amp
Marshall JCM800 (modded with KT88 tubes, as used on Mellon Collie sessions)
Gain
4
Bass
5.5
Mid
6.5
Treble
6.5
Presence
5.5
Reverb
2.5
Full 1979 tone breakdown, effects and sources →

Different guitar or pedals? Get 1979 adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts The Smashing Pumpkins's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Roland Cube 20X settings for 1979?

Set Gain 4, Bass 5, Mid 6, Treble 6, Reverb 1.5, Efx knob 5.

Which pickup should I use for 1979?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did The Smashing Pumpkins use on 1979?

Guitar: Fender Stratocaster (likely 1970s or early 80s, as used by Billy Corgan in studio). Amp: Marshall JCM800 (modded with KT88 tubes, as used on Mellon Collie sessions).

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Roland Cube 20X

All 11 songs for the Roland Cube 20X →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.