ToneAdapt

Loading...

Roland Cube 30X settings

Walk settings for Roland Cube 30X

Pantera · adapted 8 times on ToneAdapt

To get the Pantera "Walk" riff tone on a Roland Cube 30X, set Gain 8.5, Bass 6, Mid 3.5, Treble 7.5, Reverb 0, Efx knob 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Schecter Synyster Gates Standard · updated 2026-11-13

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Roland Cube 30X knobs

Gain
8.5
Bass
6
Mid
3.5
Treble
7.5
Reverb
0
Efx knob
0
Power squeezer
1
Delay reverb knob
0

Playing tips

  • Focus on tight palm muting for percussive chugs.
  • Use a sharp pick attack to achieve a razor-sharp tone.
  • Experiment with your picking dynamics to enhance clarity.

The original rig

What Pantera used on the recording, for reference. ToneAdapt translates this to the controls your Roland Cube 30X actually has.

Guitar
Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power)
Amp
Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers)
Gain
8.5
Bass
6
Mid
3.5
Treble
7.5
Presence
7
Reverb
0
Full Walk tone breakdown, effects and sources →

Different guitar or pedals? Get Walk adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pantera's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Roland Cube 30X settings for Walk?

Set Gain 8.5, Bass 6, Mid 3.5, Treble 7.5, Reverb 0, Efx knob 0.

Which pickup should I use for Walk?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Pantera use on Walk?

Guitar: Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power). Amp: Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers).

Will these settings work with my guitar?

These settings were adapted for a Schecter Synyster Gates Standard. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Roland Cube 30X

All 8 songs for the Roland Cube 30X →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.