ToneAdapt

Loading...

Roland Cube 40GX settings

Before I Forget settings for Roland Cube 40GX

Slipknot · adapted 3 times on ToneAdapt

To get the Slipknot "Before I Forget" riff tone on a Roland Cube 40GX, select the Metal Stack preset, then set Gain 8.5, Bass 6, Mid 5, Treble 7, Reverb 0.5, Lead gain 7. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

updated 2026-03-26

Preset / mode
Metal Stack
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Roland Cube 40GX knobs

Gain
8.5
Bass
6
Mid
5
Treble
7
Reverb
0.5
Lead gain
7
Tap tempo
0
I cube link
0
Lead volume
8
Master volume
7
Jc clean volume
5

Built-in effects

  • Reverb off

Playing tips

  • Use tight palm muting for chugging rhythms.
  • Pick aggressively to achieve a percussive attack.
  • Keep the amp's built-in reverb at a low level to maintain clarity.

The original rig

What Slipknot used on the recording, for reference. ToneAdapt translates this to the controls your Roland Cube 40GX actually has.

Guitar
Ibanez MTM1 (Mick Thomson signature, mahogany body, fixed bridge, Drop B tuning)
Amp
Rivera Knucklehead Reverb 100 (KT88 power tubes, Celestion G12T-75 speakers)
Gain
9.5
Bass
6.5
Mid
6
Treble
7.5
Presence
6.5
Reverb
1
Full Before I Forget tone breakdown, effects and sources →

Different guitar or pedals? Get Before I Forget adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Slipknot's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Roland Cube 40GX for Before I Forget?

Start from the Metal Stack preset, then set Gain 8.5, Bass 6, Mid 5, Treble 7, Reverb 0.5, Lead gain 7.

Which pickup should I use for Before I Forget?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Slipknot use on Before I Forget?

Guitar: Ibanez MTM1 (Mick Thomson signature, mahogany body, fixed bridge, Drop B tuning). Amp: Rivera Knucklehead Reverb 100 (KT88 power tubes, Celestion G12T-75 speakers).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Roland Cube 40GX

All 11 songs for the Roland Cube 40GX →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.