ToneAdapt

Loading...

Roland CUBE-40XL settings

Master of Puppets settings for Roland CUBE-40XL

Metallica · adapted 8 times on ToneAdapt

To get the Metallica "Master of Puppets" riff tone on a Roland CUBE-40XL, select the METAL STACK preset, then set Gain 9, Bass 6, Mid 3, Treble 7.5, Reverb 0.5, Efx 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Schecter Reaper-6 · updated 2026-11-02

Preset / mode
METAL STACK
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Roland CUBE-40XL knobs

Gain
9
Bass
6
Mid
3
Treble
7.5
Reverb
0.5
Efx
0
Solo
0
Delay looper
0
Power squeezer
1

Built-in effects

  • Reverb on (Spring) · 0.5

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Utilize fast alternate picking to achieve the aggressive attack.
  • Keep the rhythm percussive and precise for clarity.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Roland CUBE-40XL actually has.

Guitar
ESP MX220 (custom, aka 'Eet Fuk')
Amp
Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet
Gain
9
Bass
6
Mid
3
Treble
7.5
Presence
6.5
Reverb
1
Full Master of Puppets tone breakdown, effects and sources →

Different guitar or pedals? Get Master of Puppets adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Roland CUBE-40XL for Master of Puppets?

Start from the METAL STACK preset, then set Gain 9, Bass 6, Mid 3, Treble 7.5, Reverb 0.5, Efx 0.

Which pickup should I use for Master of Puppets?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Master of Puppets?

Guitar: ESP MX220 (custom, aka 'Eet Fuk'). Amp: Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet.

Will these settings work with my guitar?

These settings were adapted for a Schecter Reaper-6. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Roland CUBE-40XL

All 14 songs for the Roland CUBE-40XL →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.