Valeton GP-200 settings
Pride and Joy settings for Valeton GP-200
Stevie Ray Vaughan · adapted 11 times on ToneAdapt
To get the Stevie Ray Vaughan "Pride and Joy" riff tone on a Valeton GP-200, use the Dark Vibra (Fender Vibroverb) amp model on the clean channel, then set Drive 4, Master 7, Bass 7, Mid 7, Treble 6, Presence 5. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.
Riff settings
Adapted for a PRS SE Silver Sky · updated 2026-11-08
- Amp model
- Dark Vibra (Fender Vibroverb)
- Channel
- Clean
- Cab
- 2x12 open back
- Pickup
- Bridge + Middle
- Guitar knobs
- Tone 7-8 · Volume 8-9
Amp block
- Drive
- 4
- Master
- 7
- Bass
- 7
- Mid
- 7
- Treble
- 6
- Presence
- 5
Effects chain
- 1overdriveTS-OD (Ibanez Tube Screamer TS808)Gain 3.5 · Tone 5 · Level 8
- 2compressionCOMP Compressor (Ross Compressor)Level 6 · Ratio 4 · Attack 5 · Release 5
- 3reverbSpring Reverb (Fender Spring Reverb)Mix 2 · Decay 3
Playing tips
- Focus on a Texas shuffle feel to capture the groove.
- Use a percussive attack to emphasize the rhythm.
- Maintain a dynamic touch to allow for clean headroom and slight grit.
The original rig
What Stevie Ray Vaughan used on the recording, for reference. ToneAdapt translates this to the controls your Valeton GP-200 actually has.
- Guitar
- 1963 Fender Stratocaster 'Number One'
- Amp
- 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio)
- Gain
- 4
- Bass
- 7
- Mid
- 7
- Treble
- 6
- Presence
- 5.5
- Reverb
- 3
Different guitar or pedals? Get Pride and Joy adapted to your exact rig
These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan's tone to your own guitar, pickups, amp and pedals in seconds.
Frequently asked questions
What amp model should I use on the Valeton GP-200 for Pride and Joy?
Use the Dark Vibra (Fender Vibroverb) (clean channel) with Drive 4, Master 7, Bass 7, Mid 7, Treble 6, Presence 5, followed by TS-OD (Ibanez Tube Screamer TS808), COMP Compressor (Ross Compressor), Spring Reverb (Fender Spring Reverb).
Which pickup should I use for Pride and Joy?
Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.
What gear did Stevie Ray Vaughan use on Pride and Joy?
Guitar: 1963 Fender Stratocaster 'Number One'. Amp: 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio).
Will these settings work with my guitar?
These settings were adapted for a PRS SE Silver Sky. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.
Pride and Joy on other amps
- Pride and Joy on Fender Mustang LT25 · 157
- Pride and Joy on Boss Katana · 133
- Pride and Joy on Line 6 Helix Floor / LT / Rack · 59
- Pride and Joy on Neural DSP Quad Cortex · 40
- Pride and Joy on Fender Champion 20 · 38
- Pride and Joy on Line 6 POD Go / POD Go Wireless · 38
- Pride and Joy on Boss GT-1000 · 33
- Pride and Joy on Positive Grid Spark · 31
Popular songs on the Valeton GP-200
- Sweet Child O' Mine · Guns N' Roses
- Hotel California · Eagles
- Walk · Pantera
- Enter Sandman · Metallica
- Crazy Train · Ozzy Osbourne
- Back in Black · AC/DC
- Holy Wars · Megadeth
- Do I Wanna Know? · Arctic Monkeys
- Highway to Hell · AC/DC
- Whole Lotta Love · Led Zeppelin
- Raining Blood · Slayer
- Stairway to Heaven · Led Zeppelin
Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.