ToneAdapt

Loading...

Vox Valvetronix VT30 settings

Comfortably Numb settings for Vox Valvetronix VT30

Pink Floyd · adapted 2 times on ToneAdapt

To get the Pink Floyd "Comfortably Numb" solo tone on a Vox Valvetronix VT30, select the AC30TB preset, then set Gain 5, Bass 5, Mid 6, Treble 6, Reverb 3. Use the neck pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Fender American Performer Telecaster Hum · updated 2026-10-10

Preset / mode
AC30TB
Pickup
Neck pickup
Guitar knobs
Tone 10 · Volume 10

Vox Valvetronix VT30 knobs

Gain
5
Bass
5
Mid
6
Treble
6
Reverb
3

Built-in effects

  • Delay on
  • Chorus on
  • Reverb on (plate) · 2

Playing tips

  • Use your amp's built-in delay set to a moderate level to recreate the spacious feel of the original tone.
  • Engage the chorus effect for added modulation and lushness in your leads.
  • Maintain a steady hand for smooth, sustained notes to achieve that liquid lead tone.

The original rig

What Pink Floyd used on the recording, for reference. ToneAdapt translates this to the controls your Vox Valvetronix VT30 actually has.

Guitar
1969 Fender Stratocaster (alder body, late-'70s Charvel birdseye maple neck)
Amp
Hiwatt DR103 100-watt head (studio, parallel with Yamaha RA-200 rotating speaker cabinet)
Gain
5
Bass
6.5
Mid
7.5
Treble
7
Presence
6
Reverb
2.5
Full Comfortably Numb tone breakdown, effects and sources →

Different guitar or pedals? Get Comfortably Numb adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pink Floyd's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Vox Valvetronix VT30 for Comfortably Numb?

Start from the AC30TB preset, then set Gain 5, Bass 5, Mid 6, Treble 6, Reverb 3.

Which pickup should I use for Comfortably Numb?

Neck pickup, with the guitar's tone at 10 and volume at 10.

What gear did Pink Floyd use on Comfortably Numb?

Guitar: 1969 Fender Stratocaster (alder body, late-'70s Charvel birdseye maple neck). Amp: Hiwatt DR103 100-watt head (studio, parallel with Yamaha RA-200 rotating speaker cabinet).

Will these settings work with my guitar?

These settings were adapted for a Fender American Performer Telecaster Hum. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Vox Valvetronix VT30

All 9 songs for the Vox Valvetronix VT30 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.