ToneAdapt

Loading...

Vox Valvetronix VT40X settings

Man in the Box settings for Vox Valvetronix VT40X

Alice in Chains · adapted 2 times on ToneAdapt

To get the Alice in Chains "Man in the Box" riff tone on a Vox Valvetronix VT40X, select the Brit 800 preset, then set Gain 7.5, Bass 5, Mid 6.5, Treble 6, Reverb 0.5, Bias shift 1. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Jackson Dinky · updated 2026-08-16

Preset / mode
Brit 800
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Vox Valvetronix VT40X knobs

Gain
7.5
Bass
5
Mid
6.5
Treble
6
Reverb
0.5
Bias shift
1
Power level
10
Class selector
1

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Focus on tight palm muting to achieve the chugging effect.
  • Use aggressive picking to enhance the percussive attack.
  • Maintain a steady rhythm to keep the intensity of the riff.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Vox Valvetronix VT40X actually has.

Guitar
G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo)
Amp
Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era)
Gain
7.5
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
1.5
Full Man in the Box tone breakdown, effects and sources →

Different guitar or pedals? Get Man in the Box adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Vox Valvetronix VT40X for Man in the Box?

Start from the Brit 800 preset, then set Gain 7.5, Bass 5, Mid 6.5, Treble 6, Reverb 0.5, Bias shift 1.

Which pickup should I use for Man in the Box?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Alice in Chains use on Man in the Box?

Guitar: G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo). Amp: Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era).

Will these settings work with my guitar?

These settings were adapted for a Jackson Dinky. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Vox Valvetronix VT40X

All 22 songs for the Vox Valvetronix VT40X →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.