ToneAdapt

Loading...

Yamaha THR settings

Killing in the Name settings for Yamaha THR

Rage Against the Machine · adapted 3 times on ToneAdapt

To get the Rage Against the Machine "Killing in the Name" riff tone on a Yamaha THR, select the Clean preset, then set Gain 1.5, Bass 5.5, Mid 7, Treble 6.5, Presence 4, Reverb 0. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Stratocaster · updated 2026-08-19

Preset / mode
Clean
Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Yamaha THR knobs

Gain
1.5
Bass
5.5
Mid
7
Treble
6.5
Presence
4
Reverb
0

Playing tips

  • Focus on a clean, percussive attack to maintain clarity.
  • Use dynamic picking to enhance the articulation of each note.
  • Keep the strumming tight and controlled for a punchy rhythm.

The original rig

What Rage Against the Machine used on the recording, for reference. ToneAdapt translates this to the controls your Yamaha THR actually has.

Guitar
Fender Telecaster American Designer Edition (Drop D, main guitar for studio recording)
Amp
Marshall JCM800 2205 head (studio recording, early 1990s)
Gain
7.5
Bass
5.5
Mid
7
Treble
6.5
Presence
6.5
Reverb
0
Full Killing in the Name tone breakdown, effects and sources →

Different guitar or pedals? Get Killing in the Name adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Rage Against the Machine's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Yamaha THR for Killing in the Name?

Start from the Clean preset, then set Gain 1.5, Bass 5.5, Mid 7, Treble 6.5, Presence 4, Reverb 0.

Which pickup should I use for Killing in the Name?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Rage Against the Machine use on Killing in the Name?

Guitar: Fender Telecaster American Designer Edition (Drop D, main guitar for studio recording). Amp: Marshall JCM800 2205 head (studio recording, early 1990s).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Yamaha THR

All 29 songs for the Yamaha THR →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.