ToneAdapt

Loading...

Yamaha THR10II settings

Alive settings for Yamaha THR10II

Pearl Jam · adapted 3 times on ToneAdapt

To get the Pearl Jam "Alive" solo tone on a Yamaha THR10II, select the CLEAN preset, then set Gain 1.5, Bass 4, Mid 7, Treble 6, Reverb 1.5, Effect 0. Use the neck + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Solo settings

Adapted for a Fender Jaguar · updated 2026-10-06

Preset / mode
CLEAN
Pickup
Neck + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Yamaha THR10II knobs

Gain
1.5
Bass
4
Mid
7
Treble
6
Reverb
1.5
Effect
0
Echo rev
0
Audio output
5
Guitar output
7

Built-in effects

  • Reverb on (spring) · 3

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Pick dynamically to enhance the articulation and clarity of each note.
  • Maintain a consistent picking technique to achieve the glassy highs characteristic of the original tone.

The original rig

What Pearl Jam used on the recording, for reference. ToneAdapt translates this to the controls your Yamaha THR10II actually has.

Guitar
Fender Stratocaster (likely 1960s or '57 Reissue, Aged White, as seen in 1991-92 live footage)
Amp
Marshall 1960A 4x12 Cabinet with 65 Amps Empire 22-watt Tube Head and/or Satellite Atom 36-Watt Head (studio era, early 1990s)
Gain
6
Bass
6
Mid
7
Treble
6.5
Presence
6
Reverb
2.5
Full Alive tone breakdown, effects and sources →

Different guitar or pedals? Get Alive adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pearl Jam's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Yamaha THR10II for Alive?

Start from the CLEAN preset, then set Gain 1.5, Bass 4, Mid 7, Treble 6, Reverb 1.5, Effect 0.

Which pickup should I use for Alive?

Neck + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Pearl Jam use on Alive?

Guitar: Fender Stratocaster (likely 1960s or '57 Reissue, Aged White, as seen in 1991-92 live footage). Amp: Marshall 1960A 4x12 Cabinet with 65 Amps Empire 22-watt Tube Head and/or Satellite Atom 36-Watt Head (studio era, early 1990s).

Will these settings work with my guitar?

These settings were adapted for a Fender Jaguar. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Yamaha THR10II

All 46 songs for the Yamaha THR10II →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.