ToneAdapt

Loading...

Yamaha THR10II settings

Kiss me before I rise settings for Yamaha THR10II

chilldspot · adapted 4 times on ToneAdapt

To get the chilldspot "Kiss me before I rise" solo tone on a Yamaha THR10II, select the CRUNCH preset, then set Gain 4.5, Bass 6, Mid 6, Treble 6, Reverb 0.5, Effect 4. Use the neck + middle pickup with your guitar's tone on 6-7 and volume on 7-8.

Solo settings

updated 2026-04-13

Preset / mode
CRUNCH
Pickup
Neck + Middle
Guitar knobs
Tone 6-7 · Volume 7-8

Yamaha THR10II knobs

Gain
4.5
Bass
6
Mid
6
Treble
6
Reverb
0.5
Effect
4
Echo rev
0
Audio output
5
Guitar output
8

Built-in effects

  • Reverb off

Playing tips

  • Use your amp's built-in delay set to a moderate level to recreate the spacious feel of the original tone.
  • Incorporate smooth bends and slides to enhance the singing quality of your solos.
  • Experiment with varying your picking dynamics to achieve a more expressive tone.

Riff settings

updated 2026-04-13

Preset / mode
CRUNCH
Pickup
Bridge pickup (single-coil)
Guitar knobs
Tone 7-8 · Volume 8-9

Yamaha THR10II knobs

Gain
4.5
Bass
6
Mid
6
Treble
6.5
Reverb
0.5
Effect
0
Echo rev
0
Audio output
0
Guitar output
8

Built-in effects

  • Reverb off

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Play with a light touch to maintain clarity in the riff.
  • Focus on dynamic picking to enhance the edge of the tone.

The original rig

What chilldspot used on the recording, for reference. ToneAdapt translates this to the controls your Yamaha THR10II actually has.

Guitar
Unknown (likely Fender Stratocaster or similar single-coil guitar, based on genre and era, but no direct source found)
Amp
Unknown (likely Fender or Vox-style clean amp, but no direct source found)
Gain
3
Bass
5.5
Mid
5.5
Treble
6.5
Presence
5.5
Reverb
3.5
Full Kiss me before I rise tone breakdown, effects and sources →

Different guitar or pedals? Get Kiss me before I rise adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts chilldspot's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Yamaha THR10II for Kiss me before I rise?

Start from the CRUNCH preset, then set Gain 4.5, Bass 6, Mid 6, Treble 6, Reverb 0.5, Effect 4.

Which pickup should I use for Kiss me before I rise?

Neck + Middle, with the guitar's tone at 6-7 and volume at 7-8.

What gear did chilldspot use on Kiss me before I rise?

Guitar: Unknown (likely Fender Stratocaster or similar single-coil guitar, based on genre and era, but no direct source found). Amp: Unknown (likely Fender or Vox-style clean amp, but no direct source found).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Yamaha THR10II

All 46 songs for the Yamaha THR10II →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.