ToneAdapt

Loading...

Yamaha THR10II settings

Man in the Box settings for Yamaha THR10II

Alice in Chains · adapted 3 times on ToneAdapt

To get the Alice in Chains "Man in the Box" riff tone on a Yamaha THR10II, select the BRITISH HI preset, then set Gain 7.5, Bass 5, Mid 6.5, Treble 7, Reverb 0.5, Effect 0. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Yamaha Pacifica 112V · updated 2026-10-19

Preset / mode
BRITISH HI
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Yamaha THR10II knobs

Gain
7.5
Bass
5
Mid
6.5
Treble
7
Reverb
0.5
Effect
0
Echo rev
0
Audio output
5
Guitar output
8

Built-in effects

  • Reverb on (Spring) · 0.5

Playing tips

  • Use tight palm muting for chugging riffs to achieve the aggressive rhythm crunch.
  • Focus on a percussive attack to articulate note separation in the riff.
  • Maintain a consistent picking attack to emphasize the midrange punch of the tone.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Yamaha THR10II actually has.

Guitar
G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo)
Amp
Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era)
Gain
7.5
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
1.5
Full Man in the Box tone breakdown, effects and sources →

Different guitar or pedals? Get Man in the Box adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Yamaha THR10II for Man in the Box?

Start from the BRITISH HI preset, then set Gain 7.5, Bass 5, Mid 6.5, Treble 7, Reverb 0.5, Effect 0.

Which pickup should I use for Man in the Box?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Alice in Chains use on Man in the Box?

Guitar: G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo). Amp: Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Pacifica 112V. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Yamaha THR10II

All 46 songs for the Yamaha THR10II →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.