ToneAdapt

Loading...

Yamaha THR10X settings

There’s Fear In Letting Go settings for Yamaha THR10X

I Prevail · adapted 2 times on ToneAdapt

To get the I Prevail "There’s Fear In Letting Go" riff tone on a Yamaha THR10X, select the POWER I preset, then set Gain 9, Master 6, Bass 5, Mid 3, Treble 7, Reverb 0.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Harley Benton SC-500 BK Vintage Series · updated 2026-10-14

Preset / mode
POWER I
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Yamaha THR10X knobs

Gain
9
Master
6
Bass
5
Mid
3
Treble
7
Reverb
0.5
Effect
0
Dly rev
0

Built-in effects

  • Reverb on (Digital) · 0.5

Playing tips

  • Use aggressive palm muting to emphasize the tight chugs.
  • Focus on precise picking to maintain clarity in the riff.
  • Experiment with picking dynamics for added articulation.

The original rig

What I Prevail used on the recording, for reference. ToneAdapt translates this to the controls your Yamaha THR10X actually has.

Guitar
Likely ESP E-II Horizon or similar modern superstrat (exact model not confirmed for this recording)
Amp
Likely Kemper Profiler or Axe-Fx digital modeler (studio), high-gain amp model (e.g., Mesa/Boogie Dual Rectifier or Peavey 5150 profile)
Gain
9
Bass
6
Mid
4.5
Treble
7
Presence
6.5
Reverb
1
Full There’s Fear In Letting Go tone breakdown, effects and sources →

Different guitar or pedals? Get There’s Fear In Letting Go adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts I Prevail's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Yamaha THR10X for There’s Fear In Letting Go?

Start from the POWER I preset, then set Gain 9, Master 6, Bass 5, Mid 3, Treble 7, Reverb 0.5.

Which pickup should I use for There’s Fear In Letting Go?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did I Prevail use on There’s Fear In Letting Go?

Guitar: Likely ESP E-II Horizon or similar modern superstrat (exact model not confirmed for this recording). Amp: Likely Kemper Profiler or Axe-Fx digital modeler (studio), high-gain amp model (e.g., Mesa/Boogie Dual Rectifier or Peavey 5150 profile).

Will these settings work with my guitar?

These settings were adapted for a Harley Benton SC-500 BK Vintage Series. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Yamaha THR10X

All 19 songs for the Yamaha THR10X →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.