ToneAdapt

Loading...

Riff Tone

Electric Funeral

Black Sabbath

Guitarmetal1970s

Original Gear

Guitar1964 Gibson SG Special (aka 'Monkey')
AmpLaney LA100BL (100-watt tube head, early model, likely with Laney 4x12 cabinet)
PickupsP-90 single coil pickups

Amp Settings

gain8
bass7.5
mid7.5
treble6
reverb0
presence6

Effects & Signal Chain

boostDallas Arbiter Dallas Rangemaster Treble Booster (modified)

Notes

Studio recording, 1970. Used for the riff section of 'Electric Funeral' on the Paranoid album. Amp was likely cranked to full volume for natural distortion. Modified Dallas Rangemaster treble booster was used in front of the amp. No evidence of additional pedals for the riff section; wah is used in the solo, not the riff.

Tone Character(10)
dark and menacingfuzzy and saturatedmid-heavy with thick low endraw, vintage tube breakuppunchy and aggressivesustained power chordsuncompressed, open amp soundno audible reverb or delayslightly nasal treble boostclassic British crunch

Difficulty

The riff is slow and based on power chords, but requires tight timing, heavy palm muting, and dynamic control to capture the menacing feel.

This tone has been researched 2 times by the community

Create an account to adapt this tone to your gear

Create Free Account

Electric Funeral settings for your amp

Exact settings ToneAdapt players use on these amps.

More Black Sabbath tones

Black Sabbath gear & all tones →
Electric Funeral by Black Sabbath — Riff Tone Settings | ToneAdapt