ToneAdapt

Loading...

Fear of the Dark

Iron Maiden

Solo

Original amp settings

Tone: Clean
0
Gain
5.5
Bass
6.5
Mid
7
Treble
6
Presence
2
Reverb
Guitar
Fender Stratocaster (Dave Murray's 1963/57 hybrid, likely with DiMarzio Super Distortion in bridge, Fender single coils in neck/middle)
Amp
Marshall JMP 2204 Mk II Master Lead 50w head into Marshall 1960B 4x12 cabinet
Pickups
Fender single coil (neck/middle), DiMarzio Super Distortion (bridge); clean sections almost always use neck or neck+middle single coils

Effects

None

No pedals on this part. The sound comes from the guitar and amp.

Notes on the recording

Studio recording, 1991-1992. Clean sections on 'Fear of the Dark' are played by Dave Murray using his Stratocaster into a Marshall JMP 2204. No evidence of chorus or heavy modulation; clean achieved by rolling down guitar volume and low amp gain. Effects are minimal, possibly just amp spring reverb. No evidence of pedals in clean section signal chain.

What it sounds like

Bright and glassyArticulate and percussiveClear note separationMinimal breakupSlight spring reverb ambienceDynamic response to pickingClassic Strat neck pickup clarityNo audible modulationStudio-polished cleanTouch-sensitive

How hard it is to play

2.5/5

The clean solo section requires accurate picking and dynamic control to maintain clarity and avoid unwanted breakup, but does not involve advanced techniques or fast passages.

Sources

Log in to like this tone

Get this tone on your gear

These are the settings from the recording. ToneAdapt adapts them to your own guitar, amp, pickups and pedals.

Adapt to my gear
Download on the App StoreGet it on Google Play

Fear of the Dark on your amp

Exact settings ToneAdapt players use on these amps.

More Iron Maiden tones

Iron Maiden's gear and every tone