ToneAdapt

Loading...

Riff Tone

Now That's Country

Marty Stuart

Guitarcountry1990s

Original Gear

Guitar1954 Fender Telecaster with B-bender ('Clarence')
AmpFender Silverface Deluxe Reverb (SIR rental, modded by Andy Arahood)
PickupsVintage single-coil Telecaster pickups

Amp Settings

gain0
bass5
mid6
treble7.5
reverb3.5
presence5.5

Effects & Signal Chain

No effects used for this tone

Notes

Studio recording, 1991. Marty Stuart is confirmed to have used his 'Clarence' Telecaster and a Silverface Deluxe Reverb (SIR rental, modded for more growl) for the clean riff sections. Pedal use is minimal, with a Radial PB-1 boost and MXR EQ sometimes present, but for clean rhythm, mostly straight into amp. No evidence of compression or slapback delay on this track's clean riff. Onboard amp spring reverb is used. All sources point to the studio rig, not live.

Tone Character(10)
bright and twangyclean and articulatesnappy attacktouch-sensitive dynamicstight low endslightly scooped midsclassic Telecaster bridge bitespring reverb depthclear note separationminimal coloration from pedals

Difficulty

The riff requires accurate picking and dynamic control to achieve the signature clean, twangy country sound, but does not involve advanced techniques or fast passages.

Create an account to adapt this tone to your gear

Create Free Account

More Marty Stuart tones

Marty Stuart gear & all tones →
Now That's Country by Marty Stuart — Riff Tone Settings | ToneAdapt