ToneAdapt

Loading...

Blackstar BEAM Mini settings

Enter Sandman settings for Blackstar BEAM Mini

Metallica · adapted 4 times on ToneAdapt

To get the Metallica "Enter Sandman" riff tone on a Blackstar BEAM Mini, select the OD 2 preset, then set Gain 8, Reverb 0, Isf 7. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

updated 2026-11-10

Preset / mode
OD 2
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Blackstar BEAM Mini knobs

Gain
8
Reverb
0
Isf
7

Playing tips

  • Use tight palm muting for chugging riffs.
  • Focus on an aggressive attack to enhance articulation.
  • Maintain consistent picking speed for clarity in note separation.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar BEAM Mini actually has.

Guitar
ESP MX-220 (black finish)
Amp
Mesa/Boogie Mark IIC++
Gain
8
Bass
5.5
Mid
4.5
Treble
7
Presence
4.5
Reverb
0
Full Enter Sandman tone breakdown, effects and sources →

Different guitar or pedals? Get Enter Sandman adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Blackstar BEAM Mini for Enter Sandman?

Start from the OD 2 preset, then set Gain 8, Reverb 0, Isf 7.

Which pickup should I use for Enter Sandman?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Enter Sandman?

Guitar: ESP MX-220 (black finish). Amp: Mesa/Boogie Mark IIC++.

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar BEAM Mini

All 11 songs for the Blackstar BEAM Mini →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.