ToneAdapt

Loading...

Blackstar ID:Core 10 V3 settings

Raining Blood settings for Blackstar ID:Core 10 V3

Slayer · adapted 3 times on ToneAdapt

To get the Slayer "Raining Blood" riff tone on a Blackstar ID:Core 10 V3, select the OD 1 preset, then set Gain 8.5, Volume 7, Isf 7, Dly type 1, Mod type 1, Rev type 1. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a ESP LTD EC-256 · updated 2026-11-02

Preset / mode
OD 1
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Blackstar ID:Core 10 V3 knobs

Gain
8.5
Volume
7
Isf
7
Dly type
1
Mod type
1
Rev type
1
Effect level
0
Manual store
0

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive pick attack to enhance articulation.
  • Keep your playing staccato for the fast riffing sections.

The original rig

What Slayer used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar ID:Core 10 V3 actually has.

Guitar
B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era)
Amp
Marshall JCM800 2203
Gain
8.5
Bass
5
Mid
5.5
Treble
7
Presence
7
Reverb
0
Full Raining Blood tone breakdown, effects and sources →

Different guitar or pedals? Get Raining Blood adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Slayer's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Blackstar ID:Core 10 V3 for Raining Blood?

Start from the OD 1 preset, then set Gain 8.5, Volume 7, Isf 7, Dly type 1, Mod type 1, Rev type 1.

Which pickup should I use for Raining Blood?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Slayer use on Raining Blood?

Guitar: B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era). Amp: Marshall JCM800 2203.

Will these settings work with my guitar?

These settings were adapted for a ESP LTD EC-256. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar ID:Core 10 V3

All 31 songs for the Blackstar ID:Core 10 V3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.