ToneAdapt

Loading...

Blackstar ID:Core 10 V3 settings

Seven Nation Army settings for Blackstar ID:Core 10 V3

The White Stripes · adapted 2 times on ToneAdapt

To get the The White Stripes "Seven Nation Army" riff tone on a Blackstar ID:Core 10 V3, select the Super Crunch preset, then set Gain 6.5, Volume 7, Isf 5, Dly type 1, Mod type 1, Rev type 1. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Yamaha Revstar · updated 2026-05-28

Preset / mode
Super Crunch
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Blackstar ID:Core 10 V3 knobs

Gain
6.5
Volume
7
Isf
5
Dly type
1
Mod type
1
Rev type
1
Effect level
5
Manual store
0

Playing tips

  • Use your amp's built-in chorus set to a moderate level to recreate the octave-down effect.
  • Focus on aggressive picking to accentuate the punchy fuzz tone.
  • Incorporate slide playing for added sustain and body in the riff.

The original rig

What The White Stripes used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar ID:Core 10 V3 actually has.

Guitar
Early-'60s Kay K6533 archtop hollowbody
Amp
Mid-'60s Sears Silvertone 1485 (head + 6x10 cab with Jensen C10Q ceramic speakers)
Gain
6.5
Bass
7
Mid
6
Treble
6.5
Presence
6.5
Reverb
0
Full Seven Nation Army tone breakdown, effects and sources →

Different guitar or pedals? Get Seven Nation Army adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts The White Stripes's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Blackstar ID:Core 10 V3 for Seven Nation Army?

Start from the Super Crunch preset, then set Gain 6.5, Volume 7, Isf 5, Dly type 1, Mod type 1, Rev type 1.

Which pickup should I use for Seven Nation Army?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did The White Stripes use on Seven Nation Army?

Guitar: Early-'60s Kay K6533 archtop hollowbody. Amp: Mid-'60s Sears Silvertone 1485 (head + 6x10 cab with Jensen C10Q ceramic speakers).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Revstar. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar ID:Core 10 V3

All 31 songs for the Blackstar ID:Core 10 V3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.