ToneAdapt

Loading...

Blackstar ID:Core 10 V4 settings

I Was Made for Lovin' You settings for Blackstar ID:Core 10 V4

Kiss · adapted 2 times on ToneAdapt

To get the Kiss "I Was Made for Lovin' You" riff tone on a Blackstar ID:Core 10 V4, select the Crunch preset, then set Gain 0, Gain 6.5, Volume 7, Presence 6, Reverb 0, ISF 6. Use the bridge pickup with your guitar's tone on 8-9 and volume on 8-9.

Riff settings

Adapted for a Gibson Les Paul · updated 2026-06-25

Preset / mode
Crunch
Pickup
Bridge pickup
Guitar knobs
Tone 8-9 · Volume 8-9

Blackstar ID:Core 10 V4 knobs

Gain
0
Gain
6.5
Volume
7
Presence
6
Reverb
0
ISF
6
Voice
3
Tap Tempo
0
Effects Type
0
Effects Level
0
Power Reduction
8

Playing tips

  • Strum or pick close to the bottom of the bridge pickup for clarity.
  • Use dynamic interplay between tone and volume controls to shape the sound.
  • Maintain a tight picking attack to emphasize the crunch and note definition.

The original rig

What Kiss used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar ID:Core 10 V4 actually has.

Guitar
1978 Gibson Les Paul Custom
Amp
Marshall Super Lead 100 (model 1959, late '70s, likely with 4x12 cabinet)
Gain
6.5
Bass
5.5
Mid
6
Treble
8.5
Presence
5.5
Reverb
1
Full I Was Made for Lovin' You tone breakdown, effects and sources →

Different guitar or pedals? Get I Was Made for Lovin' You adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Kiss's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Blackstar ID:Core 10 V4 for I Was Made for Lovin' You?

Start from the Crunch preset, then set Gain 0, Gain 6.5, Volume 7, Presence 6, Reverb 0, ISF 6.

Which pickup should I use for I Was Made for Lovin' You?

Bridge pickup, with the guitar's tone at 8-9 and volume at 8-9.

What gear did Kiss use on I Was Made for Lovin' You?

Guitar: 1978 Gibson Les Paul Custom. Amp: Marshall Super Lead 100 (model 1959, late '70s, likely with 4x12 cabinet).

Will these settings work with my guitar?

These settings were adapted for a Gibson Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar ID:Core 10 V4

All 47 songs for the Blackstar ID:Core 10 V4 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.