ToneAdapt

Loading...

Blackstar ID:Core 20 V3 settings

Stairway to Heaven settings for Blackstar ID:Core 20 V3

Led Zeppelin · adapted 3 times on ToneAdapt

To get the Led Zeppelin "Stairway to Heaven" solo tone on a Blackstar ID:Core 20 V3, select the Clean Bright preset, then set Gain 6, Volume 7, Reverb 1.5, Isf 6, Dly level 0, Mod level 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a PRS SE Custom 24 · updated 2026-11-07

Preset / mode
Clean Bright
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Blackstar ID:Core 20 V3 knobs

Gain
6
Volume
7
Reverb
1.5
Isf
6
Dly level
0
Mod level
0
Rev level
0

Built-in effects

  • Reverb on (Spring) · 1.5

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Focus on dynamic picking to achieve the articulate single notes characteristic of the solo.
  • Experiment with the volume knob on your guitar to control the attack and sustain during the lead.

The original rig

What Led Zeppelin used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar ID:Core 20 V3 actually has.

Guitar
1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup)
Amp
Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased)
Gain
6
Bass
6.5
Mid
5
Treble
7
Presence
5.5
Reverb
2
Full Stairway to Heaven tone breakdown, effects and sources →

Different guitar or pedals? Get Stairway to Heaven adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Led Zeppelin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Blackstar ID:Core 20 V3 for Stairway to Heaven?

Start from the Clean Bright preset, then set Gain 6, Volume 7, Reverb 1.5, Isf 6, Dly level 0, Mod level 0.

Which pickup should I use for Stairway to Heaven?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Led Zeppelin use on Stairway to Heaven?

Guitar: 1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup). Amp: Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased).

Will these settings work with my guitar?

These settings were adapted for a PRS SE Custom 24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar ID:Core 20 V3

All 8 songs for the Blackstar ID:Core 20 V3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.