ToneAdapt

Loading...

Boss GX-10 settings

Paradise City settings for Boss GX-10

Guns N' Roses · adapted 2 times on ToneAdapt

To get the Guns N' Roses "Paradise City" riff tone on a Boss GX-10, use the JC Clean amp model on the clean channel, then set Gain 1.5, Bass 5, Mid 5, Treble 5. Use the neck pickup with your guitar's tone on 7-8 and volume on 7-8.

Riff settings

Adapted for a PRS SE Custom 24 · updated 2026-05-16

Amp model
JC Clean
Channel
Clean
Cab
Open back cabinet
Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 7-8

Boss GX-10 knobs

Gain
1.5
Bass
5
Mid
5
Treble
5

Amp block

Drive
2
Master
7
Bass
5.5
Mid
6.5
Treble
7
Presence
6
Original drive
2

Effects chain

  1. 1modulationChorusMix 5 · Rate 5 · Depth 6
  2. 2reverbSpringMix 4 · Decay 5

Playing tips

  • Focus on playing with a light touch to maintain clarity in the clean riff.
  • Use fingerstyle or a soft pick attack to enhance the shimmery quality of the tone.
  • Experiment with subtle dynamics to bring out the bell-like arpeggios.

The original rig

What Guns N' Roses used on the recording, for reference. ToneAdapt translates this to the controls your Boss GX-10 actually has.

Guitar
1986 Gibson Les Paul Standard
Amp
Marshall JCM800 2203 head (100W, likely with Marshall 4x12 cabinet, studio recording)
Gain
7.5
Bass
5.5
Mid
6.5
Treble
7.5
Presence
6
Reverb
2
Full Paradise City tone breakdown, effects and sources →

Different guitar or pedals? Get Paradise City adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Guns N' Roses's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Boss GX-10 for Paradise City?

Use the JC Clean (clean channel) with Drive 2, Master 7, Bass 5.5, Mid 6.5, Treble 7, Presence 6, followed by Chorus, Spring.

Which pickup should I use for Paradise City?

Neck pickup, with the guitar's tone at 7-8 and volume at 7-8.

What gear did Guns N' Roses use on Paradise City?

Guitar: 1986 Gibson Les Paul Standard. Amp: Marshall JCM800 2203 head (100W, likely with Marshall 4x12 cabinet, studio recording).

Will these settings work with my guitar?

These settings were adapted for a PRS SE Custom 24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss GX-10

All 52 songs for the Boss GX-10 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.