ToneAdapt

Loading...

Boss GX-100 settings

Whipping Post settings for Boss GX-100

The Allman Brothers Band · adapted 2 times on ToneAdapt

To get the The Allman Brothers Band "Whipping Post" solo tone on a Boss GX-100, use the Brit Stack amp model on the crunch channel, then set Gain 4, Bass 5, Mid 5, Treble 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 10.

Solo settings

Adapted for a PRS SE Custom 24 · updated 2026-08-26

Amp model
Brit Stack
Channel
Crunch
Cab
4x12 cabinet
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 10

Boss GX-100 knobs

Gain
4
Bass
5
Mid
5
Treble
5

Amp block

Drive
6
Master
7
Bass
6.5
Mid
7
Treble
5.5
Presence
5.5

Effects chain

  1. 1overdriveTS808Gain 5 · Tone 6 · Level 7
  2. 2reverbSpringMix 3 · Decay 4
  3. 3noise gateNoise GateRelease 5 · Threshold 4

Playing tips

  • Focus on smooth, vocal-like slides to emulate Duane's style.
  • Use fingerstyle for a warmer attack and better control over dynamics.
  • Incorporate bends and vibrato to enhance expressiveness in the solo.

Riff settings

Adapted for a PRS SE Custom 24 · updated 2026-08-26

Amp model
Brit Stack
Channel
Crunch
Cab
4x12
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Boss GX-100 knobs

Gain
3.5
Bass
5
Mid
5
Treble
5

Amp block

Drive
6
Master
7
Bass
6.5
Mid
7
Treble
6.5
Presence
5.5
Original drive
6

Effects chain

  1. 1overdriveSD-1Gain 5 · Tone 6 · Level 7
  2. 2reverbSpringMix 4 · Decay 4
  3. 3noise gateNoise GateThreshold 4

Playing tips

  • Use a light touch for dynamic control; the original tone is very touch-sensitive.
  • Focus on picking near the bridge for a brighter attack.
  • Experiment with palm muting for a punchier sound in the riff.

The original rig

What The Allman Brothers Band used on the recording, for reference. ToneAdapt translates this to the controls your Boss GX-100 actually has.

Guitar
Gibson Les Paul Standard (1957 Goldtop, Duane Allman) or 1958/59 Les Paul Standard (Dickey Betts)
Amp
Marshall JMP 50-watt Plexi (model 1987, 1969 era, likely 4x12 cab, Duane Allman); Marshall JMP 50-watt or 100-watt Plexi (Dickey Betts); possible Fender Twin Reverb for some parts
Gain
5.5
Bass
6.5
Mid
7
Treble
6.5
Presence
5.5
Reverb
1.5
Full Whipping Post tone breakdown, effects and sources →

Different guitar or pedals? Get Whipping Post adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts The Allman Brothers Band's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Boss GX-100 for Whipping Post?

Use the Brit Stack (crunch channel) with Drive 6, Master 7, Bass 6.5, Mid 7, Treble 5.5, Presence 5.5, followed by TS808, Spring, Noise Gate.

Which pickup should I use for Whipping Post?

Bridge pickup, with the guitar's tone at 7-8 and volume at 10.

What gear did The Allman Brothers Band use on Whipping Post?

Guitar: Gibson Les Paul Standard (1957 Goldtop, Duane Allman) or 1958/59 Les Paul Standard (Dickey Betts). Amp: Marshall JMP 50-watt Plexi (model 1987, 1969 era, likely 4x12 cab, Duane Allman); Marshall JMP 50-watt or 100-watt Plexi (Dickey Betts); possible Fender Twin Reverb for some parts.

Will these settings work with my guitar?

These settings were adapted for a PRS SE Custom 24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Whipping Post on other amps

Popular songs on the Boss GX-100

All 36 songs for the Boss GX-100 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.