ToneAdapt

Loading...

Boss Katana 100 Gen 3 settings

Pride and Joy settings for Boss Katana 100 Gen 3

Stevie Ray Vaughan & Double Trouble · adapted 3 times on ToneAdapt

To get the Stevie Ray Vaughan & Double Trouble "Pride and Joy" riff tone on a Boss Katana 100 Gen 3, set Gain 4, Bass 6, Mid 6, Treble 6, Presence 5, Reverb 0. Use the bridge pickup with your guitar's tone on 6-7 and volume on 8-9.

Riff settings

Adapted for a Yamaha Revstar RSE20 · updated 2026-10-14

Pickup
Bridge pickup
Guitar knobs
Tone 6-7 · Volume 8-9

Boss Katana 100 Gen 3 knobs

Gain
4
Bass
6
Mid
6
Treble
6
Presence
5
Reverb
0
Fx
0
Bst
0
Contour
0
Variation
0
Solo boost
0
Cab resonance
0
Power control
2

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Focus on a percussive attack to capture the dynamic response of the riff.
  • Experiment with your picking strength to achieve the touch-sensitive edge-of-breakup sound.

The original rig

What Stevie Ray Vaughan & Double Trouble used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 100 Gen 3 actually has.

Guitar
1963 Fender Stratocaster 'Number One'
Amp
Fender Vibroverb (Blackface, 1964) and Dumble Dumbleland Special (studio recording, only one Vibroverb miked for main riff)
Gain
4
Bass
7
Mid
7
Treble
6
Presence
5
Reverb
3
Full Pride and Joy tone breakdown, effects and sources →

Different guitar or pedals? Get Pride and Joy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan & Double Trouble's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 100 Gen 3 settings for Pride and Joy?

Set Gain 4, Bass 6, Mid 6, Treble 6, Presence 5, Reverb 0.

Which pickup should I use for Pride and Joy?

Bridge pickup, with the guitar's tone at 6-7 and volume at 8-9.

What gear did Stevie Ray Vaughan & Double Trouble use on Pride and Joy?

Guitar: 1963 Fender Stratocaster 'Number One'. Amp: Fender Vibroverb (Blackface, 1964) and Dumble Dumbleland Special (studio recording, only one Vibroverb miked for main riff).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Revstar RSE20. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana 100 Gen 3

All 84 songs for the Boss Katana 100 Gen 3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.