ToneAdapt

Loading...

Boss Katana 100 Gen 3 settings

Lenny settings for Boss Katana 100 Gen 3

Stevie Ray Vaughan & Double Trouble · adapted 2 times on ToneAdapt

To get the Stevie Ray Vaughan & Double Trouble "Lenny" riff tone on a Boss Katana 100 Gen 3, set Gain 0, Bass 6, Mid 6, Treble 6, Presence 4, Reverb 0. Use the neck pickup with your guitar's tone on 7-8 and volume on 7-8.

Riff settings

Adapted for a Yamaha Revstar RSE20 · updated 2026-10-14

Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 7-8

Boss Katana 100 Gen 3 knobs

Gain
0
Bass
6
Mid
6
Treble
6
Presence
4
Reverb
0
Fx
0
Bst
0
Contour
0
Variation
0
Solo boost
0
Cab resonance
0
Power control
2

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Play with a light touch to enhance the touch-sensitive dynamics of the clean tone.
  • Roll back the guitar volume slightly for a cleaner sound, similar to the original recording.

The original rig

What Stevie Ray Vaughan & Double Trouble used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 100 Gen 3 actually has.

Guitar
Fender Stratocaster 'Lenny' (1963/64 body, mid-50s maple neck, rosewood fretboard, stock single-coil pickups, heavy gauge strings, Eb tuning)
Amp
1964 Fender Vibroverb (15" speaker, modded by César Díaz, studio recording)
Gain
0
Bass
6.5
Mid
6.5
Treble
6.5
Presence
5
Reverb
5.5
Full Lenny tone breakdown, effects and sources →

Different guitar or pedals? Get Lenny adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan & Double Trouble's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 100 Gen 3 settings for Lenny?

Set Gain 0, Bass 6, Mid 6, Treble 6, Presence 4, Reverb 0.

Which pickup should I use for Lenny?

Neck pickup, with the guitar's tone at 7-8 and volume at 7-8.

What gear did Stevie Ray Vaughan & Double Trouble use on Lenny?

Guitar: Fender Stratocaster 'Lenny' (1963/64 body, mid-50s maple neck, rosewood fretboard, stock single-coil pickups, heavy gauge strings, Eb tuning). Amp: 1964 Fender Vibroverb (15" speaker, modded by César Díaz, studio recording).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Revstar RSE20. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

More Stevie Ray Vaughan & Double Trouble on the Boss Katana 100 Gen 3

All Stevie Ray Vaughan & Double Trouble tones →

Popular songs on the Boss Katana 100 Gen 3

All 84 songs for the Boss Katana 100 Gen 3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.