ToneAdapt

Loading...

Boss Katana 50 Gen 3 settings

Be Quiet and Drive (Far Away) settings for Boss Katana 50 Gen 3

Deftones · adapted 7 times on ToneAdapt

To get the Deftones "Be Quiet and Drive (Far Away)" riff tone on a Boss Katana 50 Gen 3, set Gain 8.5, Bass 5, Mid 4, Treble 7, Reverb 0.5, Fx 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

updated 2026-10-16

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Boss Katana 50 Gen 3 knobs

Gain
8.5
Bass
5
Mid
4
Treble
7
Reverb
0.5
Fx
0
Bst
0
Variation
1
Power control
2

Built-in effects

  • Chorus on
  • Flanger on

Playing tips

  • Use your amp's built-in chorus set to a moderate level to recreate the swirling texture.
  • Engage the Focus Switch for added punch in the mix.
  • Experiment with the Special Switching positions for tonal variations during the riff.

The original rig

What Deftones used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 50 Gen 3 actually has.

Guitar
ESP Custom (early Stephen Carpenter signature, 6-string, likely alder body, rosewood board)
Amp
ADA MP-1 preamp into Marshall 9200 power amp
Gain
8.5
Bass
6.5
Mid
4.5
Treble
7
Presence
6
Reverb
2
Full Be Quiet and Drive (Far Away) tone breakdown, effects and sources →

Different guitar or pedals? Get Be Quiet and Drive (Far Away) adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Deftones's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 50 Gen 3 settings for Be Quiet and Drive (Far Away)?

Set Gain 8.5, Bass 5, Mid 4, Treble 7, Reverb 0.5, Fx 0.

Which pickup should I use for Be Quiet and Drive (Far Away)?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Deftones use on Be Quiet and Drive (Far Away)?

Guitar: ESP Custom (early Stephen Carpenter signature, 6-string, likely alder body, rosewood board). Amp: ADA MP-1 preamp into Marshall 9200 power amp.

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana 50 Gen 3

All 141 songs for the Boss Katana 50 Gen 3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.