ToneAdapt

Loading...

Boss Katana 50 Gen 3 settings

Stairway to Heaven settings for Boss Katana 50 Gen 3

Led Zeppelin · adapted 25 times on ToneAdapt

To get the Led Zeppelin "Stairway to Heaven" solo tone on a Boss Katana 50 Gen 3, set Gain 6, Bass 5, Mid 6, Treble 7, Reverb 1.5, Fx 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Fender Stratocaster · updated 2026-11-09

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Boss Katana 50 Gen 3 knobs

Gain
6
Bass
5
Mid
6
Treble
7
Reverb
1.5
Fx
0
Bst
5
Variation
0
Power control
2

Built-in effects

  • Reverb on (Spring) · 1.5

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Experiment with picking dynamics to achieve the articulate single notes characteristic of the original solo.
  • Maintain a light touch for clearer note separation and a biting attack.

The original rig

What Led Zeppelin used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 50 Gen 3 actually has.

Guitar
1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup)
Amp
Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased)
Gain
6
Bass
6.5
Mid
5
Treble
7
Presence
5.5
Reverb
2
Full Stairway to Heaven tone breakdown, effects and sources →

Different guitar or pedals? Get Stairway to Heaven adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Led Zeppelin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 50 Gen 3 settings for Stairway to Heaven?

Set Gain 6, Bass 5, Mid 6, Treble 7, Reverb 1.5, Fx 0.

Which pickup should I use for Stairway to Heaven?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Led Zeppelin use on Stairway to Heaven?

Guitar: 1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup). Amp: Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana 50 Gen 3

All 141 songs for the Boss Katana 50 Gen 3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.