ToneAdapt

Loading...

Boss Katana 50 MkII settings

Casualty settings for Boss Katana 50 MkII

LINKIN PARK · adapted 2 times on ToneAdapt

To get the LINKIN PARK "Casualty" riff tone on a Boss Katana 50 MkII, set Gain 8.5, Bass 5, Mid 5, Treble 7, Reverb 0.5, Fx 0. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a PRS SE CE 24 · updated 2026-10-12

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Boss Katana 50 MkII knobs

Gain
8.5
Bass
5
Mid
5
Treble
7
Reverb
0.5
Fx
0
Bst
0
Variation
1
Power control
2

Built-in effects

  • Reverb on (Digital) · 0.5

Playing tips

  • Use palm muting for tight chugs and articulate note separation.
  • Engage your amp's built-in reverb for a slight ambient feel.
  • Experiment with picking dynamics to enhance the percussive attack.

The original rig

What LINKIN PARK used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 50 MkII actually has.

Guitar
Fractal Audio FC-12 (used as effects processor/controller, not a guitar); no explicit guitar model confirmed for 'Casualty' riff section
Amp
Unknown (no explicit amp model confirmed for 'Casualty' riff section; Fractal Audio FC-12 likely controlling amp modeling or digital amp sim)
Gain
8.5
Bass
6
Mid
5
Treble
7
Presence
6
Reverb
1.5
Full Casualty tone breakdown, effects and sources →

Different guitar or pedals? Get Casualty adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts LINKIN PARK's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 50 MkII settings for Casualty?

Set Gain 8.5, Bass 5, Mid 5, Treble 7, Reverb 0.5, Fx 0.

Which pickup should I use for Casualty?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did LINKIN PARK use on Casualty?

Guitar: Fractal Audio FC-12 (used as effects processor/controller, not a guitar); no explicit guitar model confirmed for 'Casualty' riff section. Amp: Unknown (no explicit amp model confirmed for 'Casualty' riff section; Fractal Audio FC-12 likely controlling amp modeling or digital amp sim).

Will these settings work with my guitar?

These settings were adapted for a PRS SE CE 24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana 50 MkII

All 150 songs for the Boss Katana 50 MkII →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.