ToneAdapt

Loading...

Boss Katana 50 MkII settings

Na Na Na (Na Na Na Na Na Na Na Na Na) settings for Boss Katana 50 MkII

My Chemical Romance · adapted 2 times on ToneAdapt

To get the My Chemical Romance "Na Na Na (Na Na Na Na Na Na Na Na Na)" riff tone on a Boss Katana 50 MkII, set Gain 7.5, Bass 4, Mid 5.5, Treble 7.5, Reverb 0.5, Master volume control 7. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Epiphone Les Paul · updated 2026-06-10

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Boss Katana 50 MkII knobs

Gain
7.5
Bass
4
Mid
5.5
Treble
7.5
Reverb
0.5
Master volume control
7

Built-in effects

  • Reverb on (spring) · 1.5

Playing tips

  • Use your amp's built-in reverb set to a low level to recreate the slight ambience of the original tone.
  • Focus on tight picking for a percussive attack that enhances the aggressive rhythm.
  • Maintain a consistent palm muting technique to achieve the tight, aggressive crunch characteristic of the riff.

Solo settings

Adapted for a Gibson Les Paul · updated 2026-10-18

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Boss Katana 50 MkII knobs

Gain
7.5
Bass
4
Mid
6.5
Treble
7
Reverb
0.5
Fx
0
Bst
6
Variation
1
Power control
2

Built-in effects

  • Reverb on (Spring) · 0.5

Playing tips

  • Use your amp's built-in reverb set to a moderate level for added depth.
  • Engage the booster for a volume lift during the solo to cut through the mix.
  • Focus on articulate picking to maintain clarity in the high-gain setting.

The original rig

What My Chemical Romance used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 50 MkII actually has.

Guitar
Gibson Les Paul Custom (likely Frank Iero or Ray Toro's main studio guitar for Danger Days era)
Amp
Marshall JCM800 (studio recording, as referenced for MCR's main tone in this era)
Gain
7.5
Bass
4.5
Mid
5.5
Treble
7.5
Presence
6
Reverb
1.5
Full Na Na Na (Na Na Na Na Na Na Na Na Na) tone breakdown, effects and sources →

Different guitar or pedals? Get Na Na Na (Na Na Na Na Na Na Na Na Na) adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts My Chemical Romance's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 50 MkII settings for Na Na Na (Na Na Na Na Na Na Na Na Na)?

Set Gain 7.5, Bass 4, Mid 5.5, Treble 7.5, Reverb 0.5, Master volume control 7.

Which pickup should I use for Na Na Na (Na Na Na Na Na Na Na Na Na)?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did My Chemical Romance use on Na Na Na (Na Na Na Na Na Na Na Na Na)?

Guitar: Gibson Les Paul Custom (likely Frank Iero or Ray Toro's main studio guitar for Danger Days era). Amp: Marshall JCM800 (studio recording, as referenced for MCR's main tone in this era).

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Na Na Na (Na Na Na Na Na Na Na Na Na) on other amps

More My Chemical Romance on the Boss Katana 50 MkII

All My Chemical Romance tones →

Popular songs on the Boss Katana 50 MkII

All 150 songs for the Boss Katana 50 MkII →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.