ToneAdapt

Loading...

Boss Katana Gen 3 50W settings

Stairway to Heaven settings for Boss Katana Gen 3 50W

Led Zeppelin · adapted 10 times on ToneAdapt

To get the Led Zeppelin "Stairway to Heaven" solo tone on a Boss Katana Gen 3 50W, set Gain 6, Bass 6, Mid 5, Treble 7, Reverb 1.5, Fx 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Jackson JS Series Dinky JS12 · updated 2026-10-21

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Boss Katana Gen 3 50W knobs

Gain
6
Bass
6
Mid
5
Treble
7
Reverb
1.5
Fx
0
Bst
5
Variation
0
Power control
2

Built-in effects

  • Reverb on (Spring) · 1.5

Playing tips

  • Use your amp's built-in reverb set to a low level to recreate the spacious feel of the original tone.
  • Pick with varying intensity to achieve the dynamic response characteristic of the original solo.
  • Focus on clear note separation by articulating each note distinctly.

The original rig

What Led Zeppelin used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana Gen 3 50W actually has.

Guitar
1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup)
Amp
Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased)
Gain
6
Bass
6.5
Mid
5
Treble
7
Presence
5.5
Reverb
2
Full Stairway to Heaven tone breakdown, effects and sources →

Different guitar or pedals? Get Stairway to Heaven adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Led Zeppelin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana Gen 3 50W settings for Stairway to Heaven?

Set Gain 6, Bass 6, Mid 5, Treble 7, Reverb 1.5, Fx 0.

Which pickup should I use for Stairway to Heaven?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Led Zeppelin use on Stairway to Heaven?

Guitar: 1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup). Amp: Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased).

Will these settings work with my guitar?

These settings were adapted for a Jackson JS Series Dinky JS12. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana Gen 3 50W

All 35 songs for the Boss Katana Gen 3 50W →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.