ToneAdapt

Loading...

Boss Katana GO settings

Stairway to Heaven settings for Boss Katana GO

Led Zeppelin · adapted 4 times on ToneAdapt

To get the Led Zeppelin "Stairway to Heaven" solo tone on a Boss Katana GO, set Gain 6, Bass 5.5, Mid 6, Treble 7, Reverb 1.5, Bst 5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a PRS SE CE 24 · updated 2026-11-01

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Boss Katana GO knobs

Gain
6
Bass
5.5
Mid
6
Treble
7
Reverb
1.5
Bst
5
Variation
1
Cab resonance
1

Built-in effects

  • Reverb on · 1.5

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Engage the booster for added volume and sustain during the solo.
  • Focus on dynamic picking to achieve the articulate note separation characteristic of the original tone.

The original rig

What Led Zeppelin used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana GO actually has.

Guitar
1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup)
Amp
Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased)
Gain
6
Bass
6.5
Mid
5
Treble
7
Presence
5.5
Reverb
2
Full Stairway to Heaven tone breakdown, effects and sources →

Different guitar or pedals? Get Stairway to Heaven adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Led Zeppelin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana GO settings for Stairway to Heaven?

Set Gain 6, Bass 5.5, Mid 6, Treble 7, Reverb 1.5, Bst 5.

Which pickup should I use for Stairway to Heaven?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Led Zeppelin use on Stairway to Heaven?

Guitar: 1959 Fender Telecaster (painted 'Dragon' finish, rosewood neck, bridge pickup). Amp: Supro Coronado 1690T (12-inch Oxford speaker re-coned with Pulsonic cone, cold-biased).

Will these settings work with my guitar?

These settings were adapted for a PRS SE CE 24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana GO

All 17 songs for the Boss Katana GO →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.