ToneAdapt

Loading...

Fender Rumble 40 settings

Symphony of Destruction settings for Fender Rumble 40

Megadeth · adapted 4 times on ToneAdapt

To get the Megadeth "Symphony of Destruction" distorted tone on a Fender Rumble 40, set Gain 5, Drive 3, Bass 3, Mid 6.5, Treble 6.5, Bright voicing 0. Use the music man humbucker (bridge position, only option) pickup.

Distorted settings

Adapted for a Sterling by Music Man StingRay RAY5 · updated 2026-09-05

Pickup
Music Man humbucker (bridge position, only option)

Fender Rumble 40 knobs

Gain
5
Drive
3
Bass
3
Mid
6.5
Treble
6.5
Bright voicing
0
Overdrive gain
6
Contour voicing
0
Overdrive level
5
Vintage voicing
1

Playing tips

  • Use a pick for a sharper attack to enhance the aggressive tone.
  • Experiment with the overdrive settings to find the right amount of grit without losing clarity.
  • Keep your right hand near the bridge for a tighter sound and more pronounced attack.

The original rig

What Megadeth used on the recording, for reference. ToneAdapt translates this to the controls your Fender Rumble 40 actually has.

Bass
Jackson King V (likely custom shop, 1992 era, with Seymour Duncan JB bridge pickup)
Amp
Marshall JMP-1 Tube MIDI Preamp into Marshall 9200 MonoBlock Power Amp (studio recording, 1992)
Gain
7.5
Bass
6.5
Mid
4
Treble
7
Presence
6
Reverb
0
Full Symphony of Destruction tone breakdown, effects and sources →

Different bass or pedals? Get Symphony of Destruction adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Megadeth's tone to your own bass, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Fender Rumble 40 settings for Symphony of Destruction?

Set Gain 5, Drive 3, Bass 3, Mid 6.5, Treble 6.5, Bright voicing 0.

Which pickup should I use for Symphony of Destruction?

Music Man humbucker (bridge position, only option).

What gear did Megadeth use on Symphony of Destruction?

Bass: Jackson King V (likely custom shop, 1992 era, with Seymour Duncan JB bridge pickup). Amp: Marshall JMP-1 Tube MIDI Preamp into Marshall 9200 MonoBlock Power Amp (studio recording, 1992).

Will these settings work with my bass?

These settings were adapted for a Sterling by Music Man StingRay RAY5. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact bass, pickups, amp and pedals.

Popular songs on the Fender Rumble 40

All 25 songs for the Fender Rumble 40 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.