ToneAdapt

Loading...

Fender Rumble LT25 settings

Another One Bites the Dust settings for Fender Rumble LT25

Queen · adapted 6 times on ToneAdapt

To get the Queen "Another One Bites the Dust" clean tone on a Fender Rumble LT25, select the STUDIO CLEAN preset, then set Gain 0, Gain 0, Drive 0, Master 8, Bass 6, Bass 6. Use the p pickup favored (80% neck / 20% bridge) pickup.

Clean settings

Adapted for a Squier Affinity Series Precision Bass PJ · updated 2026-10-10

Preset / mode
STUDIO CLEAN
Pickup
P pickup favored (80% neck / 20% bridge)

Fender Rumble LT25 knobs

Gain
0
Gain
0
Drive
0
Master
8
Bass
6
Bass
6
Mid
5
Middle
5
Treble
5
Treble
5
Compression
4

Playing tips

  • Use the P pickup for a warmer tone, which aligns with the original sound.
  • Keep your fingers relaxed to achieve a snappy attack while playing.
  • Focus on muting the strings not being played to maintain clarity and definition.

The original rig

What Queen used on the recording, for reference. ToneAdapt translates this to the controls your Fender Rumble LT25 actually has.

Bass
Fender Precision Bass (for main riff), Brian May's Red Special (for guitar noise/fx overdubs only)
Amp
Unknown bass amp (likely a Music Man or Fender Bassman for Deacon's bass), Vox AC30 (for Brian May's guitar overdubs only)
Gain
0
Bass
6
Mid
6.5
Treble
6.5
Presence
5
Reverb
1
Full Another One Bites the Dust tone breakdown, effects and sources →

Different bass or pedals? Get Another One Bites the Dust adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Queen's tone to your own bass, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Rumble LT25 for Another One Bites the Dust?

Start from the STUDIO CLEAN preset, then set Gain 0, Gain 0, Drive 0, Master 8, Bass 6, Bass 6.

Which pickup should I use for Another One Bites the Dust?

P pickup favored (80% neck / 20% bridge).

What gear did Queen use on Another One Bites the Dust?

Bass: Fender Precision Bass (for main riff), Brian May's Red Special (for guitar noise/fx overdubs only). Amp: Unknown bass amp (likely a Music Man or Fender Bassman for Deacon's bass), Vox AC30 (for Brian May's guitar overdubs only).

Will these settings work with my bass?

These settings were adapted for a Squier Affinity Series Precision Bass PJ. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact bass, pickups, amp and pedals.

Popular songs on the Fender Rumble LT25

All 40 songs for the Fender Rumble LT25 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.