ToneAdapt

Loading...

Harley Benton DNAfx Amp20 settings

1979 settings for Harley Benton DNAfx Amp20

The Smashing Pumpkins · adapted 2 times on ToneAdapt

To get the The Smashing Pumpkins "1979" riff tone on a Harley Benton DNAfx Amp20, select the Clean preset, then set Gain 4, Drive 0, Bass 5, Mid 6, Treble 6, Reverb 1.5. Use the neck pickup with your guitar's tone on 7 and volume on 8-9.

Riff settings

Adapted for a Harley Benton CST-24 · updated 2026-10-02

Preset / mode
Clean
Pickup
Neck pickup
Guitar knobs
Tone 7 · Volume 8-9

Harley Benton DNAfx Amp20 knobs

Gain
4
Drive
0
Bass
5
Mid
6
Treble
6
Reverb
1.5
Tap tempo
0
Master volume
7
Presets button
1
Amp select gain
0
Modulation select level
0
Delay reverb select level
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in chorus set to a moderate level for added shimmer.
  • Set reverb to a low level to maintain clarity while adding depth.
  • Consider using a compression pedal to smooth out dynamics and enhance sustain.

The original rig

What The Smashing Pumpkins used on the recording, for reference. ToneAdapt translates this to the controls your Harley Benton DNAfx Amp20 actually has.

Guitar
Fender Stratocaster (likely 1970s or early 80s, as used by Billy Corgan in studio)
Amp
Marshall JCM800 (modded with KT88 tubes, as used on Mellon Collie sessions)
Gain
4
Bass
5.5
Mid
6.5
Treble
6.5
Presence
5.5
Reverb
2.5
Full 1979 tone breakdown, effects and sources →

Different guitar or pedals? Get 1979 adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts The Smashing Pumpkins's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Harley Benton DNAfx Amp20 for 1979?

Start from the Clean preset, then set Gain 4, Drive 0, Bass 5, Mid 6, Treble 6, Reverb 1.5.

Which pickup should I use for 1979?

Neck pickup, with the guitar's tone at 7 and volume at 8-9.

What gear did The Smashing Pumpkins use on 1979?

Guitar: Fender Stratocaster (likely 1970s or early 80s, as used by Billy Corgan in studio). Amp: Marshall JCM800 (modded with KT88 tubes, as used on Mellon Collie sessions).

Will these settings work with my guitar?

These settings were adapted for a Harley Benton CST-24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Harley Benton DNAfx Amp20

All 17 songs for the Harley Benton DNAfx Amp20 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.