ToneAdapt

Loading...

Harley Benton DNAfx Amp20 settings

Master of Puppets settings for Harley Benton DNAfx Amp20

Metallica · adapted 19 times on ToneAdapt

To get the Metallica "Master of Puppets" riff tone on a Harley Benton DNAfx Amp20, select the Metal preset, then set Gain 9, Drive 6, Bass 5, Mid 3, Treble 7, Reverb 0.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

updated 2026-11-12

Preset / mode
Metal
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Harley Benton DNAfx Amp20 knobs

Gain
9
Drive
6
Bass
5
Mid
3
Treble
7
Reverb
0.5
Tap tempo
0
Master volume
7
Presets button
0
Amp select gain
0
Modulation select level
0
Delay reverb select level
0

Built-in effects

  • Reverb on (Spring) · 0.5

Playing tips

  • Use tight palm muting for chugging rhythms.
  • Focus on fast alternate picking to maintain articulation.
  • Keep the amp's reverb low to maintain a dry sound.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Harley Benton DNAfx Amp20 actually has.

Guitar
ESP MX220 (custom, aka 'Eet Fuk')
Amp
Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet
Gain
9
Bass
6
Mid
3
Treble
7.5
Presence
6.5
Reverb
1
Full Master of Puppets tone breakdown, effects and sources →

Different guitar or pedals? Get Master of Puppets adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Harley Benton DNAfx Amp20 for Master of Puppets?

Start from the Metal preset, then set Gain 9, Drive 6, Bass 5, Mid 3, Treble 7, Reverb 0.5.

Which pickup should I use for Master of Puppets?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Master of Puppets?

Guitar: ESP MX220 (custom, aka 'Eet Fuk'). Amp: Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet.

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Harley Benton DNAfx Amp20

All 17 songs for the Harley Benton DNAfx Amp20 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.