ToneAdapt

Loading...

Harley Benton DNAfx Amp20 settings

...And Justice for All settings for Harley Benton DNAfx Amp20

Metallica · adapted 2 times on ToneAdapt

To get the Metallica "...And Justice for All" riff tone on a Harley Benton DNAfx Amp20, select the Clean preset, then set Gain 0, Drive 0, Bass 5, Mid 3, Treble 7, Reverb 0.5. Use the neck pickup with your guitar's tone on 8-10 and volume on 8-9.

Riff settings

Adapted for a Ibanez GIO GRG121DX · updated 2026-07-14

Preset / mode
Clean
Pickup
Neck pickup
Guitar knobs
Tone 8-10 · Volume 8-9

Harley Benton DNAfx Amp20 knobs

Gain
0
Drive
0
Bass
5
Mid
3
Treble
7
Reverb
0.5
Tap tempo
0
Master volume
7
Presets button
0
Amp select gain
0
Modulation select level
0
Delay reverb select level
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in reverb set to a low level for subtle ambiance.
  • Pick with a tight attack to maintain clarity and percussiveness.
  • Focus on palm muting for tight, aggressive riffs.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Harley Benton DNAfx Amp20 actually has.

Guitar
ESP MX220 'EET FUK' Explorer
Amp
Mesa/Boogie Mark IIC+ Head (studio recording, 1988)
Gain
9
Bass
6
Mid
3
Treble
7.5
Presence
7
Reverb
1
Full ...And Justice for All tone breakdown, effects and sources →

Different guitar or pedals? Get ...And Justice for All adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Harley Benton DNAfx Amp20 for ...And Justice for All?

Start from the Clean preset, then set Gain 0, Drive 0, Bass 5, Mid 3, Treble 7, Reverb 0.5.

Which pickup should I use for ...And Justice for All?

Neck pickup, with the guitar's tone at 8-10 and volume at 8-9.

What gear did Metallica use on ...And Justice for All?

Guitar: ESP MX220 'EET FUK' Explorer. Amp: Mesa/Boogie Mark IIC+ Head (studio recording, 1988).

Will these settings work with my guitar?

These settings were adapted for a Ibanez GIO GRG121DX. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Harley Benton DNAfx Amp20

All 17 songs for the Harley Benton DNAfx Amp20 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.