ToneAdapt

Loading...

HeadRush MX5 settings

Buried Alive settings for HeadRush MX5

Avenged Sevenfold · adapted 2 times on ToneAdapt

To get the Avenged Sevenfold "Buried Alive" riff tone on a HeadRush MX5, use the 92 Treadplate amp model on the lead channel, then set Gain 6.5, Bass 5, Mid 5, Treble 5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Schecter Syn Custom-S · updated 2026-05-31

Amp model
92 Treadplate
Channel
Lead
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

HeadRush MX5 knobs

Gain
6.5
Bass
5
Mid
5
Treble
5

Amp block

Drive
8
Master
7
Bass
5.5
Mid
5
Treble
6.5
Presence
6.5
Original drive
8

Effects chain

  1. 1overdriveWhite BoostGain 5 · Bass 5 · Treble 5 · Level 8
  2. 2noise gateNoise GateRelease 5 · Threshold 5
  3. 3reverbRoomMix 3 · Decay 2

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive pick attack to enhance clarity and articulation.
  • Maintain a steady rhythm to ensure percussive low-end response.

The original rig

What Avenged Sevenfold used on the recording, for reference. ToneAdapt translates this to the controls your HeadRush MX5 actually has.

Guitar
Schecter Synyster Gates Custom
Amp
Bogner Uberschall 120-Watt Tube Guitar Amp Head
Gain
8.5
Bass
5.5
Mid
6
Treble
6.5
Presence
6.5
Reverb
1.5
Full Buried Alive tone breakdown, effects and sources →

Different guitar or pedals? Get Buried Alive adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Avenged Sevenfold's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the HeadRush MX5 for Buried Alive?

Use the 92 Treadplate (lead channel) with Drive 8, Master 7, Bass 5.5, Mid 5, Treble 6.5, Presence 6.5, followed by White Boost, Noise Gate, Room.

Which pickup should I use for Buried Alive?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Avenged Sevenfold use on Buried Alive?

Guitar: Schecter Synyster Gates Custom. Amp: Bogner Uberschall 120-Watt Tube Guitar Amp Head.

Will these settings work with my guitar?

These settings were adapted for a Schecter Syn Custom-S. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the HeadRush MX5

All 25 songs for the HeadRush MX5 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.