ToneAdapt

Loading...

Hotone Ampero II Stomp settings

Enter Sandman settings for Hotone Ampero II Stomp

Metallica · adapted 6 times on ToneAdapt

To get the Metallica "Enter Sandman" riff tone on a Hotone Ampero II Stomp, use the Bad Kitty amp model on the lead channel, then set Drive 8, Master 7, Bass 5.5, Mid 4.5, Treble 7, Presence 4.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Epiphone Les Paul · updated 2026-10-14

Amp model
Bad Kitty
Channel
Lead
Cab
Marshall 4x12
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
8
Master
7
Bass
5.5
Mid
4.5
Treble
7
Presence
4.5

Effects chain

  1. 1distortionGovernorGain 8 · Tone 7 · Level 8
  2. 2noise gateNoise GateRelease 4 · Threshold 5
  3. 3overdriveSuper DriveGain 3 · Tone 6 · Level 8

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive picking to enhance articulation and clarity.
  • Maintain a steady rhythm to emphasize the percussive nature of the riff.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Hotone Ampero II Stomp actually has.

Guitar
ESP MX-220 (black finish)
Amp
Mesa/Boogie Mark IIC++
Gain
8
Bass
5.5
Mid
4.5
Treble
7
Presence
4.5
Reverb
0
Full Enter Sandman tone breakdown, effects and sources →

Different guitar or pedals? Get Enter Sandman adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Hotone Ampero II Stomp for Enter Sandman?

Use the Bad Kitty (lead channel) with Drive 8, Master 7, Bass 5.5, Mid 4.5, Treble 7, Presence 4.5, followed by Governor, Noise Gate, Super Drive.

Which pickup should I use for Enter Sandman?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Enter Sandman?

Guitar: ESP MX-220 (black finish). Amp: Mesa/Boogie Mark IIC++.

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Hotone Ampero II Stomp

All 21 songs for the Hotone Ampero II Stomp →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.