ToneAdapt

Loading...

Kemper Profiler Head settings

Holy Wars settings for Kemper Profiler Head

Megadeth · adapted 3 times on ToneAdapt

To get the Megadeth "Holy Wars" riff tone on a Kemper Profiler Head, use the Marshall JCM 800 amp model on the lead channel, then set Drive 7, Master 7, Bass 5, Mid 5, Treble 7, Presence 6. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

updated 2026-07-19

Amp model
Marshall JCM 800
Channel
Lead
Cab
4x12 closed back with Celestion speakers
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
7
Master
7
Bass
5
Mid
5
Treble
7
Presence
6

Effects chain

  1. 1distortionMouseGain 8 · Tone 6 · Level 7
  2. 2noise gateNoise Gate
  3. 3overdriveKemper DriveGain 3 · Tone 5 · Level 6

Playing tips

  • Focus on tight palm muting for a percussive attack.
  • Use aggressive pick attack to enhance articulation.
  • Maintain a fast, staccato rhythm for the riff.

The original rig

What Megadeth used on the recording, for reference. ToneAdapt translates this to the controls your Kemper Profiler Head actually has.

Guitar
Jackson KV Pro Dave Mustaine Signature (likely with Bill Lawrence L-500XL bridge pickup)
Amp
Marshall JCM800 2203 head into DeCuir 4x12 cabinet with Celestion speakers
Gain
7.5
Bass
5
Mid
5.5
Treble
7
Presence
6.5
Reverb
0
Full Holy Wars tone breakdown, effects and sources →

Different guitar or pedals? Get Holy Wars adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Megadeth's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Kemper Profiler Head for Holy Wars?

Use the Marshall JCM 800 (lead channel) with Drive 7, Master 7, Bass 5, Mid 5, Treble 7, Presence 6, followed by Mouse, Noise Gate, Kemper Drive.

Which pickup should I use for Holy Wars?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Megadeth use on Holy Wars?

Guitar: Jackson KV Pro Dave Mustaine Signature (likely with Bill Lawrence L-500XL bridge pickup). Amp: Marshall JCM800 2203 head into DeCuir 4x12 cabinet with Celestion speakers.

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Kemper Profiler Head

All 9 songs for the Kemper Profiler Head →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.