ToneAdapt

Loading...

Kemper Profiler Head settings

Master of Puppets settings for Kemper Profiler Head

Metallica · adapted 7 times on ToneAdapt

To get the Metallica "Master of Puppets" riff tone on a Kemper Profiler Head, use the Mesa Boogie Mark IIC+ amp model on the lead channel, then set Drive 9, Master 7, Bass 6, Mid 3, Treble 7.5, Presence 6.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Fender Telecaster · updated 2026-11-02

Amp model
Mesa Boogie Mark IIC+
Channel
Lead
Cab
Mesa 4x12 cabinet
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
9
Master
7
Bass
6
Mid
3
Treble
7.5
Presence
6.5

Effects chain

  1. 1noise gatePalm NinjaThreshold 4
  2. 2distortionMetal DSDrive 7 · Bass 5 · Middle 0 · Treble 8
  3. 3boostPure BoosterVolume 3
  4. 4reverbSpring ReverbTime 4 · Dripstone 3

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use fast alternate picking to maintain aggression.
  • Keep a consistent attack to achieve razor-sharp articulation.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Kemper Profiler Head actually has.

Guitar
ESP MX220 (custom, aka 'Eet Fuk')
Amp
Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet
Gain
9
Bass
6
Mid
3
Treble
7.5
Presence
6.5
Reverb
1
Full Master of Puppets tone breakdown, effects and sources →

Different guitar or pedals? Get Master of Puppets adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Kemper Profiler Head for Master of Puppets?

Use the Mesa Boogie Mark IIC+ (lead channel) with Drive 9, Master 7, Bass 6, Mid 3, Treble 7.5, Presence 6.5, followed by Palm Ninja, Metal DS, Pure Booster, Spring Reverb.

Which pickup should I use for Master of Puppets?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Master of Puppets?

Guitar: ESP MX220 (custom, aka 'Eet Fuk'). Amp: Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet.

Will these settings work with my guitar?

These settings were adapted for a Fender Telecaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Kemper Profiler Head

All 9 songs for the Kemper Profiler Head →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.